• ModelSim licence not working

    I am hoping to use ModelSim PE Student Edition with my distance learning, undergraduate Electronics 3 class of 15 students next semester, to replace Lattice Semiconductor ispLEVER, to teach an introduction to VHDL....
    ladyeng
    created by ladyeng
  • urgent need help

    # # Please go to http://www.model.com and download an updated copy of the ModelSim PE Student Edition. # Error loading design   I have downloaded four times and put license in correct folder but still I am gett...
    kyuripark
    created by kyuripark
  • Check-in license without closing the tool-session

    Is there a command to check in the licenses used by a tool, and check them out again later to continue work on the same session? E.g. check in the license before leaving work, and check it out again next morning. I kn...
    georgios.pouiklis
    last modified by georgios.pouiklis
  • How to select license at Expedition startup ?

    Hello, I am using Expedition since several years. I remember I could select, at opening Expedition, which license to use. As I was always using "Ascent", I have set it as default and have no more the license select...
    layout
    last modified by layout
  • License Checkout Issue

    Updated to FloMaster 2019_3. Had to upgrade the license server to 11.16.4 for compatibility with the latest FloMaster. I have the server side showing both the license server and the vendor daemon up and running with t...
    dmoller
    last modified by dmoller
  • Mentor Install: Installing an older version and clicking "Check Online" for the latest version does not show the correct latest version.

    Hello,   The latest version of the license software is currently "Licensing v2019_3 (FlexNet 11.16.4 / PCLS v9.22.3.1)".   I ran "Licensing v2019_1 (FlexNet 11.16.0 / PCLS v9.20.7.3)" on the Mentorgraphic...
    hiwashig
    last modified by hiwashig
  • More port needs to be open?

    We are installing a Capital training enviroment for a customer but the server and client are using official license server.   Based on the company policy, they will close unnecessary ports and then we request 17...
    rongyue_li
    last modified by rongyue_li
  • OPT-File EXCLUDE/INCLUDE issue (same version of keys)

    Hello,   I have an issue in the license configuration.   We use location and country licenses. I configure the .opt file with INCLUDE/EXCLUDE some groups. It works well so far, but I have a problem with t...
    christianwagner
    last modified by christianwagner
  • PADS Pro License nuisance fix?

    New to PADS Professional (vx.2.6) and have encountered an annoying operation with the software and was curious if anyone has also experienced this? Has anyone found a fix or know of a way to streamline a fix?   ...
    ezmartin_ds
    created by ezmartin_ds
  • How and when to upgrade the license server for PADS Flow applications (video)

    To determine whether an upgrade of the licensing software (lmgrd/mgcld) is required on the license server, refer to the table below. Note: The lmgrd and mgcld daemons are backwards compatible for PADS releases v2003 ...
    andrew_audova
    last modified by andrew_audova
  • Which PADS Flow release am I entitled to use?

    Mobile Compute licenses (a.k.a. "Nodelocked uncounted") If an existing license file works for a prior PADS release, whether or not it will work for the most recent release depends on the version date of the licenses. ...
    andrew_audova
    last modified by andrew_audova
  • Tip of the Week: Troubleshooting slow tool invocation due to licensing

    If you are experiencing slow invocation times with one or more of your Mentor Graphics applications - here are some general tips and techniques, as well as application-specific options (for Expedition PCB and PADS Lay...
    andrew_audova
    last modified by andrew_audova
  • How to get license uses log for a month

    Hi,  I have floating license and i want to check one month log that how many users access the license in one month. 
    shany.srivastava
    last modified by shany.srivastava
  • How can I tell Gerbtool 13 to query th correct license Server?

    Hi community,   I have an issue regarding Gerbtool from Mentor 2004, maybe one can help me to resolve.   An old  physical PC with Mentor WG 2005 and the Gerbtool comming with Mentor WG 2004 works well...
    markm.
    last modified by markm.
  • Parametric database error

    We are presently using PADS VX2.1 DxDesigner in Netlist flow for Schematics. Getting the below message on invoking DxDesigner. "There is no valid license to use Parametric database". What could be the reason?
    ritu
    created by ritu
  • modeslim 10.5c very slow when using stand alone license

    Hi,   I have some servers at the LM_LICENSE_FILE and MGLS_LICENSE_FILE, also for continue working while I'm traveling I have a license.dat file at LM_LICENSE_FILE. When I'm at the office everything works perfec...
    gloustau
    last modified by gloustau
  • Modelsim licensce server error

    Hi,   last week modelsim 10.5c IntelFPGA edition had a strange behavior:  it compiled the project and when it was going to start simulating it compiled the project again and it was stuck in that never endi...
    gloustau
    last modified by gloustau
  • License error [mgls_errno = 203] with latest HASP driver 7.41.0.0

    Hi all,   I'm running Xpedition VX.1.1 with a USB dongle on a Windows 7 prof. system with HASP driver 6.65.0.0 and everything is working fine. If I upgrade the HASP driver to version 7.41.0.0 then my VX.1.1 sof...
    Wim Creyghton
    last modified by Wim Creyghton
  • Tip of the Week: Reporting license version with lmstat

    The lmstat command will report the quantity of a particular feature with the -f option. However, if you have multiple versions of a license feature, they're rolled up into a single count by default. For example:  ...
    guy_wettstein
    last modified by guy_wettstein
  • License server starting with Errors of daemon.

    10:18:50 (mgcld) License server system started on <<servername>> 10:18:50 (mgcld) No features to serve, exiting 10:18:50 (mgcld) EXITING DUE TO SIGNAL 36 Exit reason 4 10:18:50 (lmgrd) mgcld exited with...
    vpsingh
    last modified by vpsingh