• Display Control disappeared and is not displaying

    Good Day All..! I got an issue with my display control... I had a hipcup on Friday opening multiple boards and my display control disappeared and it's not displaying as it should. I believe it may be do...
    created by mthoma5
  • if Valor Process Preparation 12.4 can output the stencil size of all part

    I need to know the total area size of stencil pad of one PCB,  if Valor can output it, and how to use it? Thanks!
    created by grace
  • How to change the profile email address?

    i want to set my personal email to this account but the field is grayed out, is there any workaround?
    last modified by vytautas.r
  • Searching in "Electrical Systems, Networks, and Harnesses" page

    I am not able to perform a search from the Electrical Systems, Networks, and Harnesses page. I thought this used to work and search through all of the sub pages? It is currently returning "Your search did not return a...
    last modified by rehender
  • MotorSolve BLDC Unipolar PWM Analysis

    Will MotorSolve BLDC allow for a PWM Analysis if I plan on using a Unipolar drive? Unfortunately I'm getting no help from my sales contact (Petty Stuckey) because I do not have a support contract. He has told me to as...
    last modified by j_raymond_rsvcp
  • Fix Username

    My username was replaced with a bunch of random numbers and letters (probably UID). Is there any way to change it back?
    last modified by rich_morrell
  • Solid Edge Invert Selection Trick

    Open video

  • Mass Fraction of Nitrogen( ASM_FIANCO )_000012.avi

    hi , i am erald. i have done this simulation... i ask about validation of it , it is able floefd to give this result? becouse it has given only some time this result, it dont like to give again. thank's
    last modified by erald.n
  • New Login Process

    So, I've noticed, with the new Siemens login, that there is no Remember Me check box, and in fact, that I have to login every day, which did not used to be the case if I did not specifically logout.  What up with...
    last modified by .-.--.--
  • OrCAD 17 .BRD File Translator

    We have run into issues with the latest version of OrCAD PCB Editor 17 and their new .BRD file types. This new file type does not appear to work in ANY known translators from PADS to Altium and more. OrCAD 17 files ca...
    last modified by l.carneiro
  • What does this DRC mean?

    Multicore OAS-XXXXX inner-cores contain no common section, cannot calculate length.   This is for an Overbraid.  The wires underneath the overbraid come up with lengths, but the overbraid does not.  Co...
    last modified by davidmp
  • Add colleague to community?

    Hi community,   I created an idea for a colleague of mine, now he want's to vote. (feel free to support us: Make bridge-in & bridge-out work in multiuser mode )   Somehow he can't sign in he...
    last modified by thomasle
  • Where is my personal progress?

    My personal progress level in my profile was lost(( This is temprorary issue?
    last modified by pbo
  • Buoyancy free surface FloEFD

    I'm attempting to model the forces on an object due to water falling onto its surface (using a transient and free surface analysis).  The object is in a container which fills up with water and FloEFD se...
    last modified by dccosserat
  • Voting Writes For Ideas

    So, near the top of every idea, there are two buttons labeled "Vote Up" and "Vote Down".  On occasion, an idea for which I have previously voted up no longer matters to me.  However, there does not seem to b...
    last modified by .-.--.--
  • Fan with flying leads

    I have a fan with flying leads, what is the best way to place this on a logic diagram? Create a Device symbol with pins, which you wire too?
    last modified by paul_hough
  • How to calculate Gas Lower Heating Value_LHV in FloMaster

    Dear all,   I am trying to model a Gas system in the Flomaster version 9.1. The gas system use two different LHV(kJ/kg) gases and during transient case, both need to be mixed as per desired mixing ratio...
    last modified by taegyun2.kim
  • Is the points system still working?

    Community_Admin, is the points system still working?  I seem to be at the same amount of points for past 3-4 weeks
    last modified by jeff@viavi
  • How do I get the Field to Factory Option?

    I should have “Field to Factory” as on option under "Browse Mentor Graphics Communities" --> "Electrical Systems, Networks, and Harnesses"   
    last modified by macase
  • What is this unspecified rebuild error?

    I've gone through and set up my project to simulate conditions my equipment would experience in normal operation.  I've incorporated standard and user defined materials and radiation surfaces, etc.  However,...
    last modified by bradp.