• Find Tool/Release of Multiboard Panel File

    Hello,   I'm working with a panel design file and I have to determine what software (Xpedition or PADS) (and its version) were used to create this PNL file. I do not have any PCB file related this pane...
    FUAT SENGUL
    created by FUAT SENGUL
  • No Snapshot error while opening Expedition PCB

    I was in the middle of an Expedition PCB layout when my computer decided to upgrade to OneDrive and reboot. Now, my .pcb project won't open and I get the following errors.        
    barneyhaugen
    created by barneyhaugen
  • Make Like Reuse Issue

    Hi All, In PADS Mentor graphics,following problems often occur during use, please help to see what the problem is and how to solve it, thank you!WARNING: Terminal position mismatch (Decal C0603, terminal #1) 0 r...
    ashok_007
    last modified by ashok_007
  • Display Control disappeared and is not displaying

    Good Day All..! I got an issue with my display control... I had a hipcup on Friday opening multiple boards and my display control disappeared and it's not displaying as it should. I believe it may be do...
    mthoma5
    last modified by mthoma5
  • How to run Batch Mode on signals with AC coupling capacitor in series?

    I am running into an issue where I have hundred to thousands of nets that have AC coupling capacitor in line with them. I can run them in linesim, sim it, and wait until the capacitor is charged. However, this would b...
    etrah808
    created by etrah808
  • Error while creating netlist (dxdesigner) with Reuse_block

    I am trying to generate a netlist with a reuse_block symbol (TOPLEVEL). And using this as symbol block in schematic1. I want to use Refdes prefix as S1, S2 (for two TOPLEVEL symbols). Also refdes inside S1 n...
    shafqat
    created by shafqat
  • ECO to PCB very slow

    Is it normal that the ECO from sch to pcb or pcb to sch take 20 to 30 minutes?  why it takes so long?  is there a configuration setting that could speed up the process? I am using PADS LOGIC VX2.7  wit...
    rgomez
    created by rgomez
  • Error 329 in PCB layout and DxDesigner schematic comparison

    When I tried to compare the DxDesigner schematic with PADs layout, the system reports the error log file below:   viewbase: Error 329: Error - Duplicated port: VCC viewbase: Error 329: Error - Duplicated port: V...
    f_lu_clzcw
    created by f_lu_clzcw
  • What is the purpose or functionality of VRM in Decoupling analysis in VX2.7?

    Hi All,    I noticed that in some archived on demand tutorials, there was no VRM setting in decoupling wizard. It looks like it's added in the decoupling wizard in VX2.7. Despite I know that VRMs work at ve...
    t_peng_4gngl
    created by t_peng_4gngl
  • How I can rename the existing project?

    Hello,    I want to change or modify the whole project name ( Schematic name and Layout design file name.  If I will modify both names manually then I get the error. How I can rename the existing pro...
    yasht
    last modified by yasht
  • add/delete symbol to Databook

    how to add my "local lib" schematic symbol to Databook standard library? VX 2.6 netlist flow. sorry guys we just lost our Librarian due to RIF, very basic question but I could not find anything at the forum.
    nalfaro
    last modified by nalfaro
  • Slow DDRx Batch Simulation

    Hi,   I'm working on the simulation of Post layout DDRx batch simulation in LineSim. But is very slow. I'm simulating with 1 driver and 4 memory devices (16bits). Is there any way to increase no of core or CPU i...
    asad_rehman
    last modified by asad_rehman
  • Getting an error when using xpedition library

    Does anyone have an idea of whats going on? I just downloaded the student edition and am beginning a new project soon.
    atraindavis35
    last modified by atraindavis35
  • BACK/FORWAD ANNOTATION

    Is there a file that tells me what is changing (Backward/Forward Annotation) before I sync the lights? I would like to know if I accept the change before I implement it.   TIA, Patrick
    stratman55
    last modified by stratman55
  • Is there a way to launch PADS VX 2.7 over Remote Desktop?

    With this COVID-19 stuff causing my office to work from home as much as possible, I've run into a snag. At home I VPN to my office network, and remote desktop to my office computer (where PADS is installed, node locke...
    ba721
    last modified by ba721
  • Pyxis -Eldo Error

    In Pxyxis Schemtic while doing simuatlion , i am getting error 2 - Eldo closing . Earlier environment was fine and everything was working fine. Kindly give solution
    sree
    last modified by sree
  • Request for an example of ODB++ file with stackup information

    I need an  example of ODB++ file with stackup information.   Reason: I am a distributor for Flotherm and FLOEFD an CAE tool. These software have function to import ODB++ file and produce 3D model of ...
    iijima
    created by iijima
  • See pin name in free Layout Browser VX.2.6?

    Is it possible to get pin info in Layout Browser VX.2.6?  I can see net properties and padstack properties, but I don't see in the net properties even the names of the attached pins.   Thanks, Matt
    mattc
    last modified by mattc
  • How to check whether does an ODB++ file have information about stackup of layers

    Could you tell me the format specification of ODB++ about stackup information of layers?   I searched below material, but I could not find it. https://www.odb-sa.com/wp-content/uploads/odb_spec_user_v8_aug.pdf&...
    iijima
    last modified by iijima
  • Expedition Start Page and Recent Projects

    When I go to my Start Page and choose Recent I can only see six projects. If I add more projects some of the current ones drop off. Is it possible to expand the recent option to show ten recent projects?
    kirbstone
    last modified by kirbstone