• Need 3 different GND

    Hi there,   My application need to show 3 GND, but all should be tied with main GND. Take a look,     I know the link where the Off-pages are suggested to create, https://communities.mentor.com/mes...
    malgumhasan@gmail.com
    last modified by malgumhasan@gmail.com
  • How to create fractured symbol?

    Hi All,   I am very new in pads logic.For 400 pin connector(FMC HPC) ,i want to make symbol in three or four sub symbol. How i can make it ? Please help me .   Thanks & Regards, Kuntal
    kuntal
    last modified by kuntal
  • Translated Schematics

    Using Logic VX.2.4 I was able to translate an Altium 96 page schematic.  The problem is that it creates individual pages and I'm able to view each page I've tried so far in Logic.  But, how can I merge all t...
    john_zsori
    last modified by john_zsori
  • how to do the Schematic level  DRC checking in PADS logic Vx2.1

    Hello   Can anyone help me on steps involved to do the Schematic level  DRC checking (net connectivity, floating nets identification) in PADS logic Vx2.1.   Thanks
  • .prj to .sch to ASCII .txt?

    Hi all,   I've inherited a PADS Designer project .prj that has a bunch of schematic sheets. I need to obtain .txt ASCII files from the aforementioned schematic sheets. The only way I've found to do it seems to b...
    alarr
    last modified by alarr
  • Importing Altium .schdoc into PADS Logic VX

    I get netlist errors when I import an AD17 schematic into VX-revision PADS Logic.  The actual netlist generated by PADS Logic appears to be correct, but PADS' .ERR file is full of comments like those shown below....
    jimolson
    last modified by jimolson
  • How to change default text sizes in PADS Logic VX2.1

    Is there a way to change the default text sizes on a schematic in PADS Logic? For example, I would like all my net names to be size 6. I can go to Tools > Options > Text and change them all to size 6, however, o...
    jnicks
    last modified by jnicks
  • PADS Logic - Selection jumps upon mouse move

    When I select a group of gates and nets and then attempt to move them, I find the selection always jumps in a nonsensical way. I have struggled endlessly to work around this vexing productivity killer. I make frequent...
    rjw
    last modified by rjw
  • PADS logic links to PADS layout

    Hello, I'm trying to link the schematic in pads logic to pads layout.  First, I import the OrCad Capture schematic (.DSN) design into PADS logic.  I have no problem at this step then I click on pads layout ...
    snowball
    last modified by snowball
  • How to convert PADS schematic to DXF format

      I used to get away by creating PDFs from schematics for documentation. Now, a new customer wants the PADS schematics in DXF format. Any suggestions on how to do this will be appreciated.     Tony &#...
    tquiroz
    last modified by tquiroz
  • PADS Logic Schematic Symbol Pin Visibility

    How do I make the pins visible?  I don't see any settings in the tool and didn't find anything in the user guide.  
  • PadsLogicVx2.2 part information display Bug

    There are many versions of PadsLogic, including the current V2.2, there will be a lot of display problems, such as the following:
    jin-zhifeng
    last modified by jin-zhifeng
  • PADS LOGIC V1.2 on Windows 10 Fatal error when launching Basic Scripts

    I have a user who had Mentor Graphics 2.1 and 1.2 loaded on his Windows 7 PC. Every time he launches Basic Scripts or script editor it crashes. He upgraded to Windows 10. I had him remove all PADS products and we just...
    tiberiusjones
    last modified by tiberiusjones
  • Pads Logic lags on Windows 10 after long period of usage.

    Hi   Does anyone experience Pads Logic VX lags after continuous usage for about 6 hours? It lags by not having a slow response during zooming in and out and moving from sheet to sheet. It solves by restarting P...
    leejunguan
    created by leejunguan
  • PADS logic v2.2 crash

    Hi all,   PADS logic v2.2 always crashes when we launch it. We only have trouble with this program. Do you have the same problem? Thank you!
    ejenlien@richwave.com.tw
    last modified by ejenlien@richwave.com.tw
  • In win10,the Pads logic VX.2.2 Options dialog UI bug!

    In win10, the pads logic Options dialog box is display incomplete, so that I can't click OK or cancel. This problem has existed for a long time, and no one has ever solved it ! Do you happen to have this problem?
    jin-zhifeng
    last modified by jin-zhifeng
  • Title blocks in PADS Logic VX2.2[1]

    Is there a way to grab the fields from the title block like company name, title, Drawing number, etc from the schematic to the BOM, so when I print out the BOM, I will have all  schematic information on the headi...
    ChangeMe_119508
    last modified by ChangeMe_119508
  • Title blocks in PADS Logic VX2.2

    Is there a way to grab the fields from the title block like company name, title, Drawing number, etc from the schematic to the BOM, so when I print out the BOM, I will have all  schematic information on the headi...
    ChangeMe_119508
    last modified by ChangeMe_119508
  • Logic VX.0 - "Schematic file not compatible with current version"

    Hi,   I'm trying to load some PADS schematics I found in a project archive ZIP file from many years ago, and am encountering this error message in Logic:   Schematic file not compatible with current versio...
    philpem
    created by philpem
  • Query Related to TimeStamp while updating Part Type in PADS LOGIC

    Hello All ,   Please provide guidance for the timestamp message generated while updating part type in PADS LOGIC .   Find the attached picture for the same .   Best Regards , Parth Sutariya Hardware C...
    parth.sutariya
    last modified by parth.sutariya