• Problem with Drag and Drop PartQuest - VX.2.7

    Hi, I am new in this forum and also new in the Mentor PADS Professional Environment, so please forgive me if I place the question about my problem in the wrong place.   I want to use the drag-and-drop from PartQ...
    a_gil_nnszo
    last modified by a_gil_nnszo
  • Finding om PartQuest

    Hi,   I am wondering how to find part "545BAA250M000BAG" on PartQuest. I have found on the Digi-key but it's symbol and footprint are not available on Part Quest. I don't fine the option of request symbol or...
    joniengr081
    created by joniengr081
  • error occurred during EDX import.

    i'm using DxDesigner VX2.3. i created a layout cell for ICS41352 (DigiKey part number ICS-41352-ND), but after downloading i received "Error(s) occurred during EDX import. Please review log file at C:\WDIR\EEVX.2.3\ED...
    robb.zimmerman
    last modified by robb.zimmerman
  • SQLite or various db instead Access for Partquest

    Hello Dear Team, Happy winter holidays to your, Team, can i use sqlite or various db instead mdb (access) ? thank you!
    krusty
    last modified by krusty
  • Part Type Doesn't Exist

    OVERVIEW: I can view/place symbols and footprints for downloaded PartQuest parts, but cannot get them to port over from a schematic in Designer to Layout. This seems to be due to a missing Part Type file/association....
    benj
    last modified by benj
  • Manufacturer p/n instead of Digkey p/n

    When I downloaded parts from PartQuest it cames in with Digikey p/n. I understand that Digikey p/n is unique, but during design it is not very easy to identify that for example DIGIKEY_311_100KLRCT_ND is a 0402 100k ...
    sylvain.javelot
    last modified by sylvain.javelot
  • can't find PQ part in Library

    I am using Pad Designer for schematic capture and using the Netlist flow. I get the part from PQ and it seems to download the part. I get this message below. Problem is I can't find the part. It doesn't show in m...
    gzuk
    created by gzuk
  • partquest Part TCK-051 not match with Datasheet, Please check and confirm?

    TCK-051 Partquest Symbol and footprint mismatch with datasheet.
    sachin78
    created by sachin78
  • Select an appropiate folder

    I'm using Expedition VX.2.3, when I go to Tools open partquest part I get this message. Select an appropriate folder. the folder should be named after your flow and will be available after downloading parts from Partq...
    kirbstone
    created by kirbstone
  • How to import footprint cells created by PartsQuest

    Hello,   Parts Quest has emailed me an EDX and STP file of an FPGA package which I want to place on a PCB. The cell editor only accepts DXF files.   Can anyone help with this?   Kind regards
    louise
    last modified by louise
  • Default Cells library

    Hi Dear Team! Where is get a default Cells for Surface mount and Through Hole components, i meant about TO-92 transistor body or TO-220 or K50-35 for capacitor and so on and so on Thank you!
    krusty
    created by krusty
  • Using one partition allowed or not?

    We thought to be smart to allow the customer to download all components into one partition, something like “new_partquest”.     But when you try to download these 3 components into one and the s...
    b.hassink
    created by b.hassink
  • Change new "destination" folder for Netlist

    I am new to part-quest and was following the setup directions for netlist.  step 5 for direct download asks where you wish to make the destination folder. I specified a non-defualt directory however the next wido...
    mmcbride
    last modified by mmcbride
  • Partquest 3D models not showing up in Layout

    I just switched from Logic to DxDesigner to take advantage of all these great features like Partquest.  :-( It has taken forever to finally get all the configurations to the point where it works.  Except fo...
    paulc
    last modified by paulc
  • PartQuest Setup

    I am trying to use parts that I have downloaded from PartsQuest and following the guide PADS Netlist and PartQuest - PartQuest Documentation - SDD Wiki . Everything appears the way its supposed to until Step 14 where ...
    edward7l
    last modified by edward7l
  • PartQuest doesn't working. Why

    I installed PADS Maker and try ty find any components.   What I get:   PartQuest just freeze on search any component.   Trying following Browsers - Opera, Edge, Firefox   What I doing wrong?
    lab409
    last modified by lab409
  • Problem connecting to Partquest

    Hi, We are having problem connecting to partquest. We tried different machines/browsers/network/users  and the result is always the same error when performing a search : a red pop-up window with the message : &#...
    marco.leite
    created by marco.leite
  • Partquest new release removed link to digikey

    Partquest new release removed link to digikey, but now the search parts no longer work. The search is looking like digikey account is never linked. Anybody knows how to fix the issue?
    ysheng
    last modified by ysheng
  • Importing Property Data through xDX Databook

    The documentation on this subject (http://wiki.sdd.mentor.com/display/PD/PADS+Integrated+and+PartQuest )  contains the following statement:   "If you would like to use an existing database configuration wit...
    jamesgladden
    created by jamesgladden
  • download manufacturer p/n instead of digikey p/n

    downloaded parts from PartQuest but it came in with Digikey p/n. it there a way to download so it will come with manufacturer p/n? also change the dimension to metric instead of mils, thanks.
    nalfaro
    last modified by nalfaro