• CCZ Viewer(ocx)'s performance in graphics zoom in /zoom out needed to 10X up

    Today, We can see Mentor have adopted CCZ viewer (ocx) to view layout data in lot of tools such as Dxdesinger, Hyperlynx etc. We welcom this feature,however We hope CCZ viewer have a speedy graphics performance, 10X u...
    yu.yanfeng
    last modified by yu.yanfeng
  • It seems it is a common issue that Expeditionpcb CCZ output will make Expeditionpcb crashed if the design is big and complex.

    It seems it is a common issue that Expeditionpcb CCZ output will make Expeditionpcb crashed if the design is big and complex. I have verified this on 2 designs on 7.9.2. We didn't try to output CCZ before 7.9.2, and d...
    yu.yanfeng
    last modified by yu.yanfeng
  • Valor Trilogy 5000/Vsure's Netlist Analyzer Often Failed on Metric-unit ODB++ Databse Output From Expeditionpcb

    Valor Trilogy 5000/Vsure's Netlist Analyzer Often Failed on Metric-unit ODB++ Databse Output From Expeditionpcb. I have logged this issue on the supportnet( SR #23908840).  The issue is in Expeditonpcb side or i...
    yu.yanfeng
    last modified by yu.yanfeng
  • Expedition Enterprise Flow 7.9.1 available

    The EE 7.9.1 is available for download. It's quite slow and download links of some documantation files are broken: Managing Mentor Graphics PCB Systems Software Licensing Mentor Graphics Software Release Notes for...
    Andreas.Schaefer
    last modified by Andreas.Schaefer
  • Expedition Enterprise to Expedtion Clound

    Altium is racing with Expeditionpcb. In thier website, you will next release has almost Expeditionpcb- having features. I hope Mentor don't slow the revolution, continue to push Expeditinpcb Enterprise to a next level...
    yu.yanfeng
    last modified by yu.yanfeng
  • USB dongle can't be detected

    Hello all, has somebody bumb into the same problem as me? I have a new desktop PC and I do whatever the USB dongle is not seen by Mentor Graphics tools.   The last driver HASP aladdin is installed, I have a va...
    MaBUa
    last modified by MaBUa
  • Does anyone meet this issue in Design Capture?

    Hi friend,   When I open schematic in Design Capture, there are some texts in schematic like attached picture show, what cause this problem? Computer setup or the tool setup issue?     What's these ...
    liverpooool
    last modified by liverpooool
  • Mentor Sales call me today morning

    At 9.30, I come to company and receive a mail from Mentor sales and then phone calls from Mentor Sales. Firtst, they invite me to attend SDD Seminar hold on next month, then suggest me report bugs on the supportnet in...
    yu.yanfeng
    last modified by yu.yanfeng
  • Expeditionpcb 7.9 ouputs problematic V7.1 ODB++

    Currently, There is no opition in Expeditionpcb 7.9 to control it to ouput ODB++ V6, it directly output V7.1 ODB++. This ODB++ version can't be read into Valor Trilogy 5000 V7.X, and it can't be processed promptly by ...
    yu.yanfeng
    last modified by yu.yanfeng
  • Expeditionpcb CCZ output can't properly deal with Obstructs's layer attributes

    CCZ output writes records for obstructs on the same layers which obstructs belong to. This make visECAD and CAMCAD treats those obstructs wrongly. Suppose a ropute/via obstruct be added in Expeditinpcb and assigned to...
    yu.yanfeng
    last modified by yu.yanfeng
  • EE2007.9

    Hi,   Is somebody using the last release EE2007.9? I meet some problems during opening tools: DxDdesigner takes 2'45" to open Expedition takes 2'30" to open CES from Expedition takes 2'10"...   I insta...
    joseph.spang
    last modified by joseph.spang
  • EE2007.9 - DC

    Hello all, I'd like to ask you about the Design Capture support in this release... There is only EE available on the support net to download ... DC not... but after install I saw an DC Symbol Editor in menu...  ...
    MaBUa
    last modified by MaBUa
  • Plane Shape with vias pattern...

    Hello dear User, is there a way to automatically fill a plane shape with a vias pattern in the same as an hatch pattern ? Thx.
    Alpha
    last modified by Alpha
  • Display schemes

    Hi all,   It happens a misterious think with display schemes. The scheme works but all nets colors becomes white!!!!! Specialy after a crash... Any issue?   Joseph
    joseph.spang
    last modified by joseph.spang
  • GRID SETTING in Cell Editor

    Hello dear Community member, is there any possibility to predefine the grid Setting without using a schema.   We want our grid settings to be loaded as default every time we are opening the cell editor. How ca...
    Alpha
    last modified by Alpha
  • Using Fablink mask gererator

    We would like to use the generator to produce our solder resist masks. This seems to us what the tool is for. Unfortunately we then hit a snag; if the design has been tear dropped the tear dropping appears on the gene...
    gordon.briggs
    last modified by gordon.briggs
  • Not able to install PCLS software

    Hi all, I bump into one big problem. I have got a new desktop PC. There is only OS WinXP SP2 installed with all last updates. If I try to install pcls software it start the service but it hang in task manager and n...
    MaBUa
    last modified by MaBUa
  • FabLink ability

    Hi all, does any body can answer my question?   Is possible to use fablink instead of e.g. cam350...... mean to place several external gerber files (different board projects) and create my own panel?? And expo...
    MaBUa
    last modified by MaBUa
  • 2007.8 stability

    We currently use 2007.3 which is very unstable. It crashes about 4 times a day. Has any one installed 2007.8 which Mentor claims to be a  stability release. What are your initial views on the release.
    stephen.williams
    last modified by stephen.williams
  • Expedition can not forward annotate

    Hi, I have problem on Expedition set up. On the schematic side when I click the Expedition Icon it opens up properly BUT the Forward Annotate Botton on the ECO is not active. It gives an error  see iamge attched...
    jose.ranchero
    last modified by jose.ranchero