• Fiducial Obstructs Round 2

    There was a previos post on Fiducial Obstructs, has there been any progress on this? I believe by using the Mechanical cell placement option for placing a fiducial, the fiducial designation within the tool gets lost a...
    rene.allard
    last modified by rene.allard
  • Mounting Hole clearance set up

    I've created a Mounting Hole in Expedition VX2.4 that appears to have a clearance of 25 mils set up somewhere.  Because when I move a via close to the mounting hole the closest I can get to the mounting hole (non...
    mike.w.greenwood
    last modified by mike.w.greenwood
  • Export NC drill by each layer

    We are using Xpedition V2.5 layout for 10 layer PCB via any layer. We setup via span definitions 1-2 1-3 1-4 1-5.....1-10 any so on for layer 2 to 10. When have problem about NC drill output data describes below: 1-...
    minhphu_vinsmart
    last modified by minhphu_vinsmart
  • IPC-D-356 File format

    Hello. Could anyone guide me how to export IPC-D-356A format from Xpedition Layout VX.2.5 or how to import IPC-D-356B into Incam software? Thanks.
    khang
    last modified by khang
  • Connect Tiny Net Lines

    I was talking with an Expedition user at another company a couple of months back. He was telling me about a key in "CTI", Connect Tiny Netlines that will automatically select and finish routing the near zero length ne...
    wayne_5757
    last modified by wayne_5757
  • Gerber Output default window size setting in Xepdition

    I want to set the default of Xpedition Gerber Output Window. Drag the Contents Window because it is too small. So the way I thought is to save Gerber Plot setup file to System. In this state, however, only the wind...
    ksh
    last modified by ksh
  • Reference Designators in Step file created by Xpedition VX2.2

    Hello all, some Mentor guy, could tell me why in step files generated by Xpedition VX2.2 there is not indication of component reference designator? It seems to me that there is no way to have them? As Xpedition use...
    bbpcbdesign
    last modified by bbpcbdesign
  • Replicate component group

    Hello   How to transfer already placed component from one project to another one? on top FPGA and on bottom C&R, how to copy it from one project to another one? Schematic is the same (copied).   Xpedit...
    mkarlovsek
    last modified by mkarlovsek
  • Reccomendations for Security Software / settings that have minimal impact to Xpedition performance

    Has anyone run into problems with corporate mandated security software that impacts Xpedition's performance & stability?   Currently we are running Symantec Endpoint Protection.  We are experi...
    spoolin1
    last modified by spoolin1
  • How can I get colour visualization of 3D DRC error.similar to 2D DRC?

    How can I get colour visualization of 3D DRC error.similar to 2D DRC?   I get 3D DRC error in Hazards explorer but I couldn't identify the violation error easily.   I am using  Xpedition Lay...
    jaydeep.parmar
    last modified by jaydeep.parmar
  • User defined key bindings

    Hello all,   is it possible to create a file with user defined key bindings which I could import when I am working on the schematics? Currently there is only a general company wide file which I can not change. &...
    croscht
    last modified by croscht
  • convert expediton to allegro

    anybody know is it  possible to convert the expedition 2005 or 7.9.3 layout to allegro 16.6?
    diwakar.nimbeon
    created by diwakar.nimbeon
  • Replaced part's symbol has not changed for variants schematics

    Hi, everyone, I have encountered a variants schematic view issue in EEVX.2.3. Some of my PCs can not get the right symbol view when I entered in a variants schematic. The replaced symbol has not changed but the...
    ziyu.wang
    last modified by ziyu.wang
  • There is a way to show the unpopulated components in colors?

    Hi I find out a way to create my PDF files of assembly; I want to create a kind of Entire, but with the unpopulated components mark in color, to show my variants and see what are the components populated and what ar...
    lpaz47
    created by lpaz47
  • How to down layers in a PCB, go to 10 layers to 8?

    Hi,  I did a process and works well the design, but I am not sure if there will be issues in the future in my design,  below what I did;   1.- I did a copy of my current design(10 layers) but without...
    lpaz47
    last modified by lpaz47
  • Using Simulator PSpice - MC Runs and Sweeps

    Hello, We want start a PSpice simulation using Xpedtion 2.4 and PSpice 15.7. Is there a way to use multiruns? Like MC runs or voltage sweeps?   Regards Carl Bühner
    carl_buehner
    created by carl_buehner
  • PROBLEM - CROSS PROBING between VX.2.5 Layout Browser and VX.2.5 Designer

    Hi,   I'm having a problem with cross probing between Xpedition Designer (Xpedition Enterprise X-ENTP VX.2.5 - Update 1) and Layout Browser (Xpedition Enterprise X-ENTP VX.2.5 - Update 1). When I sele...
    saffronman
    last modified by saffronman
  • Looking to transition from Altium to Xpedition Enterprise

    Has anybody here made the transition to Xpedition Enterprise from Altium with a Vault/Nexus Server/Concord Pro?  I'd love to pick your brain about how to best make the business case to my management!
    jemerson
    last modified by jemerson
  • Cell Editor Problem

    I'm new to Expedition, but there seems to be a serious limitation that just doesn't seem right to me.  PLEASE someone let me know if I'm crazy.  I've created a Cell and I started it in thousands.  It's ...
    tligotti
    last modified by tligotti
  • Cell Editor Dialog

    If you have voted for Idea D1521 or Idea D2327 in the past, or have any interest in them now, please go to Idea D8291, read the discussion, and if you agree, please vote up.  Thanks in advance.
    .-.--.--
    last modified by .-.--.--