• xDX Designer VX.2.5 symbol ascii

    Does any documentation exist that defines the symbol ascii fields for EEVX.2.5? I am transitioning from Design Capture to xDX Designer and need to update my script that creates major multi-gate symbols/parts. Any assi...
    last modified by nicoren
  • Odd number of brackets in bus name , but there is no bracket in bus name

    Though bus name doesn't have the brackets ,DRC output shows    Odd number of brackets in bus name: BUS_GPIO_EXPANDER_I2C   But,It is connected properly between two blocks.  
    last modified by ramachandran
  • How do you have different cluster values on multiple instantiations of a hierarchical block?

    Our schematics have redundant circuit blocks (e.g. Phase A, Phase B, Phase C) that all have the same master block. In the case of high voltage design, each block has to be physically isolated from the others. If you a...
    last modified by mvarnau@borgwarner.com
  • Replace Part within Variant Manager

    Hi All,   I want to replace parts for a given variant of my board. So i have setup things on the "Library Query Setup" tab of the settings window.   I thought to be smart to use the same .dbc file that i u...
    last modified by charles.ietswaard1
  • Facing difficulties in schematic pdf creation

    I am using Xepedition ,but I am facing difficulties in schematic pdf creation. If font style kept on "System " then all font sizes increased in pdf as shown in figure.   So please suggest, If is there any ste...
  • How to define "Not Place" or "not load" to parts on Schematics Dx Designer VX2.1?

    I'm new to DxDesigner. I want to show on schematics that the part shall not be placed, although the pads remain (with a X over the part or text saying "no load"). Also, I want this to be linked to that single part, so...
    last modified by jhonathan
  • Cell Name is not a valid cell for part number?

    When using the packager command on DxDesigner VX 2.1, I receive the message "Cell Name 'C1210_2.7' is not a valid cell for Part Number '453564145041'". What does that mean? And what is a Cell name?   Thanks
    last modified by jhonathan
  • Disable Start Page when opening Designer from project file?

    Expedition Designer EEVX.2.5 When opening a Designer project from the PRJ, why is it necessary to show the Start Page? I already know what project I want to open. When opening a project this way, the Start Pag...
    last modified by nicoren
  • Xpedition Designer VX2.4: Select all bus names on a sheet

    Hello community, I would like to change the size of all of the bus names on a sheet. Is there a possibility to select all of the bus names but not the net names?   Best regards,   Matthias.
    last modified by matthias.knauss
  • more spacing between crossref when it wraps around

    is there a way to get more spacing between the crossrefs when they wrap?
    last modified by cindy_t
  • How to Add Cluster Property to Schematic

    In DxDesigner VX 2.2 cannot seem to add the CLUSTER or ROOM property to schematic symbols as used to be able to do in previous versions. Any ideas how to add these properties.
    last modified by greghall
  • how to export local symbol into central library

    Hi there, I am using VX2.4 , update 2.   Somehow my border symbol got corrupted in the central library (the symbol is still there in the library tree but it appears as blank). Luckily I have a Designer project...
    last modified by stempialdo
  • xDx Designer - hierarchical design - Packager issue ?

    Hello Community,   I have some trouble in my current schematic under VX.2.1. This time I need a hierarchical design approach. My problem is illustrated below with one connector, which consits of two symbol...
    last modified by fuba
  • Managed blocks: Error 12002: Ripper has an invalid bus reference

    Hello everyone,   I'm working with two of my colleagues on one PCB. Each one of us works on a different part of the design and we're trying to use managed blocks to bring everything together.   One thing I...
    last modified by fgrossmann@men.de
  • Move Net names Xpedition Designer VX.2.3

    I am unable to move my net names on each of my nets without dragging my net with it. Its like the net name is anchored to the net its self. Is there a setting where I can move the net name anywhere I like without ...
    last modified by jcbell
  • Variant Manager substitution question.

    Can Variant Manager be used to substitute parts that have pins swapped?   I've never used VM for this but I'm working on a design where a previous designer had a local reuse block (four instances) that...
    created by steve_bonacci
  • Schematic Nets - go to which sheets?

    I'm a newbie to Mentor Xpedition Designer.   I'm starting a new schematic. Its not too big so I don't need hierarchy, just a flat design over several sheets.   I want to ensure that nets from one sheet con...
    last modified by d.cooke
  • How to make multiple schematics in a single board in dxdesigner

    My question is how to make multiple schematics in a single board in dxdesigner.   I'd like to make hierachical design below.....     DxDesigner's Navigator       Project Name...
    last modified by marx
  • ERROR: Unable to locate CES pin

    Hi,   I'm getting a strange error when packaging for which I can't find any information. I'm getting a bunch of:   ERROR: Unable to locate CES pin "R???-?" while  attempting to connect pin to net "???...
    last modified by mathieu.lafrance
  • System Added Net Names Caused a Short

    Hi,  I have a schematic that has one particularly large circuit that was copied four times. The circuit was laid out and net names were added to certain nets. Off sheet connectors were added to nets that should c...
    last modified by wayne_5757