• Symbol type without Ref Designator

    Hi,    I am wondering to put a symbol in the schematic which does not need in the PCB layout. Is there any way to have such a symbol which is just used in schematic and not need to be packaged with cel...
    last modified by joniengr081
  • Some settings are reset after each program launch

    For example, colored nets disappear, and "Unique names on copy" option will be changed (turned back on) everytime I restart DxDesigner. How can I make these setting be constant?
    last modified by kilometrix
  • Add a netlist project - option missing

    I have installed VX2.6 AMS I want to create a netlist project, but the only option available to me in the project templates is the Xpedition flow.  How do I add a netlist flow project?
    last modified by darrell_teegarden
  • PDF export empty, just blocks and boarders shown

    Hi, when I am exporting to PDF, each page is only printed with empty blocks and border. The nets, symbols and pictures are shown, but no text. It doesn't matter which project I am using.   I have attached a pic...
    last modified by croscht
  • variant manager dropping query results

    Logical Variant manager in Xdesigner is not showing all resistors in our resistor table Our resistors table is 1300+ resistors. When we go to replace a resistor from variant manager it's showing a limited number of ...
    last modified by cgoldenbus
  • Looking for Symbols in Central Library - HLA_CentralLibrary

    Hi,    I am using these two components E-Series Transformer ETC1-1-13 and Oscillator QX333 in my schematic. I am wondering if there exist any symbol in the Central Library - HLA_CentralLibrary whi...
    created by joniengr081
  • Isn't it possible to change existing objects to a new Variant Layer?

    VX2.6 provides a new super long desired feature... to add Text, Boxes etc. to Variant Layers. So we can shown Text/drawn Tables etc. just for special Variants. so far so good.   Also new is to add User Laye...
    last modified by juergen.hinterleitner
  • VX2.6: VM in Designer shows Vars/Comps of an first opened Schematic

    Open a schematic in Designer. Then open an other schematic in a second Designer. Now when you open the Variant Manager in the second opened Designer, it will show you all the comps and variants from the first ope...
    last modified by juergen.hinterleitner
  • move component to different sheet

    Hi all  I am working on a multiple sheet design I need to update to new revision. I am rearranging and adding new componentes in new pages and deleting some unused. There are a bunch of passives (e.g. capacitors...
    last modified by davide_palmisano
  • Unable to hide "Name" on Nets since VX.2.4

    Before I create a SR with that Bug, I ask if it's a feature, which I can anywhere deactivate!? ... And after the re-select in Schematic, the checkbox is still checked!!!      We think it's ...
    last modified by juergen.hinterleitner
  • Odd number of brackets in bus name , but there is no bracket in bus name

    Though bus name doesn't have the brackets ,DRC output shows    Odd number of brackets in bus name: BUS_GPIO_EXPANDER_I2C   But,It is connected properly between two blocks.  
    last modified by ramachandran
  • How do you have different cluster values on multiple instantiations of a hierarchical block?

    Our schematics have redundant circuit blocks (e.g. Phase A, Phase B, Phase C) that all have the same master block. In the case of high voltage design, each block has to be physically isolated from the others. If you a...
    last modified by mvarnau@borgwarner.com
  • Replace Part within Variant Manager

    Hi All,   I want to replace parts for a given variant of my board. So i have setup things on the "Library Query Setup" tab of the settings window.   I thought to be smart to use the same .dbc file that i u...
    last modified by charles.ietswaard1
  • How to Add Cluster Property to Schematic

    In DxDesigner VX 2.2 cannot seem to add the CLUSTER or ROOM property to schematic symbols as used to be able to do in previous versions. Any ideas how to add these properties.
    last modified by greghall
  • how to export local symbol into central library

    Hi there, I am using VX2.4 , update 2.   Somehow my border symbol got corrupted in the central library (the symbol is still there in the library tree but it appears as blank). Luckily I have a Designer project...
    last modified by stempialdo
  • xDx Designer - hierarchical design - Packager issue ?

    Hello Community,   I have some trouble in my current schematic under VX.2.1. This time I need a hierarchical design approach. My problem is illustrated below with one connector, which consits of two symbol...
    last modified by fuba
  • Managed blocks: Error 12002: Ripper has an invalid bus reference

    Hello everyone,   I'm working with two of my colleagues on one PCB. Each one of us works on a different part of the design and we're trying to use managed blocks to bring everything together.   One thing I...
    last modified by fgrossmann@men.de
  • Schematic Nets - go to which sheets?

    I'm a newbie to Mentor Xpedition Designer.   I'm starting a new schematic. Its not too big so I don't need hierarchy, just a flat design over several sheets.   I want to ensure that nets from one sheet con...
    last modified by d.cooke
  • How to make multiple schematics in a single board in dxdesigner

    My question is how to make multiple schematics in a single board in dxdesigner.   I'd like to make hierachical design below.....     DxDesigner's Navigator       Project Name...
    last modified by marx
  • ERROR: Unable to locate CES pin

    Hi,   I'm getting a strange error when packaging for which I can't find any information. I'm getting a bunch of:   ERROR: Unable to locate CES pin "R???-?" while  attempting to connect pin to net "???...
    last modified by mathieu.lafrance