• Disable Start Page when opening Designer from project file?

    Expedition Designer EEVX.2.5 When opening a Designer project from the PRJ, why is it necessary to show the Start Page? I already know what project I want to open. When opening a project this way, the Start Pag...
    nicoren
    created by nicoren
  • Xpedition Designer VX2.4: Select all bus names on a sheet

    Hello community, I would like to change the size of all of the bus names on a sheet. Is there a possibility to select all of the bus names but not the net names?   Best regards,   Matthias.
    matthias.knauss
    last modified by matthias.knauss
  • Cell Name is not a valid cell for part number?

    When using the packager command on DxDesigner VX 2.1, I receive the message "Cell Name 'C1210_2.7' is not a valid cell for Part Number '453564145041'". What does that mean? And what is a Cell name?   Thanks
    jhonathan
    last modified by jhonathan
  • Can I change the scroll speed in Xpedition Designer?

    I use Default Pan and Zoom setting, but the scroll speed is too low, so how can I make it faster? Should I change Windows scrolling settings or maybe there is an option to set scroll speed only for Xpedition Designer?
    kilometrix
    last modified by kilometrix
  • more spacing between crossref when it wraps around

    is there a way to get more spacing between the crossrefs when they wrap?
    cindy_t
    last modified by cindy_t
  • How to Add Cluster Property to Schematic

    In DxDesigner VX 2.2 cannot seem to add the CLUSTER or ROOM property to schematic symbols as used to be able to do in previous versions. Any ideas how to add these properties.
    greghall
    last modified by greghall
  • how to export local symbol into central library

    Hi there, I am using VX2.4 , update 2.   Somehow my border symbol got corrupted in the central library (the symbol is still there in the library tree but it appears as blank). Luckily I have a Designer project...
    stempialdo
    last modified by stempialdo
  • xDx Designer - hierarchical design - Packager issue ?

    Hello Community,   I have some trouble in my current schematic under VX.2.1. This time I need a hierarchical design approach. My problem is illustrated below with one connector, which consits of two symbol...
    fuba
    last modified by fuba
  • Managed blocks: Error 12002: Ripper has an invalid bus reference

    Hello everyone,   I'm working with two of my colleagues on one PCB. Each one of us works on a different part of the design and we're trying to use managed blocks to bring everything together.   One thing I...
    fgrossmann@men.de
    last modified by fgrossmann@men.de
  • Move Net names Xpedition Designer VX.2.3

    I am unable to move my net names on each of my nets without dragging my net with it. Its like the net name is anchored to the net its self. Is there a setting where I can move the net name anywhere I like without ...
    jcbell
    last modified by jcbell
  • How to define "Not Place" or "not load" to parts on Schematics Dx Designer VX2.1?

    I'm new to DxDesigner. I want to show on schematics that the part shall not be placed, although the pads remain (with a X over the part or text saying "no load"). Also, I want this to be linked to that single part, so...
    jhonathan
    last modified by jhonathan
  • Variant Manager substitution question.

    Can Variant Manager be used to substitute parts that have pins swapped?   I've never used VM for this but I'm working on a design where a previous designer had a local reuse block (four instances) that...
    steve_bonacci
    created by steve_bonacci
  • Schematic Nets - go to which sheets?

    I'm a newbie to Mentor Xpedition Designer.   I'm starting a new schematic. Its not too big so I don't need hierarchy, just a flat design over several sheets.   I want to ensure that nets from one sheet con...
    d.cooke
    last modified by d.cooke
  • How to make multiple schematics in a single board in dxdesigner

    My question is how to make multiple schematics in a single board in dxdesigner.   I'd like to make hierachical design below.....     DxDesigner's Navigator       Project Name...
    marx
    last modified by marx
  • ERROR: Unable to locate CES pin

    Hi,   I'm getting a strange error when packaging for which I can't find any information. I'm getting a bunch of:   ERROR: Unable to locate CES pin "R???-?" while  attempting to connect pin to net "???...
    mathieu.lafrance
    last modified by mathieu.lafrance
  • System Added Net Names Caused a Short

    Hi,  I have a schematic that has one particularly large circuit that was copied four times. The circuit was laid out and net names were added to certain nets. Off sheet connectors were added to nets that should c...
    wayne_5757
    last modified by wayne_5757
  • Facing difficulties in schematic pdf creation

    I am using Xepedition ,but I am facing difficulties in schematic pdf creation. If font style kept on "System " then all font sizes increased in pdf as shown in figure.   So please suggest, If is there any ste...
  • The end of life for Design Capture?

    Can someone confirm the mentor decision to decommission design capture and the end of support? I will assume at this point customers will have access to keys to view sustaining projects or supplement for translatio...
    chris.smith
    created by chris.smith
  • Unable to hide "Name" on Nets since VX.2.4

    Before I create a SR with that Bug, I ask if it's a feature, which I can anywhere deactivate!? ... And after the re-select in Schematic, the checkbox is still checked!!!      We think it's ...
    juergen.hinterleitner
    last modified by juergen.hinterleitner
  • schematic verification

    Good afternoon everyone. I have a question on schematic verification and setting up the rules properly using the verifydefaults.ini We've been rebuilding our library from scratch and trying to incorporate the correc...
    cgoldenbus
    created by cgoldenbus