• Not able to delete Symbol

    Hi,    I am not able to delete symbol. "Warning Cannot delete the symbol. The symbol is locked by another user" I am the only user on this computer. How to delete this symbol ? The symbol is not c...
    joniengr081
    last modified by joniengr081
  • Block Interface with multiple nets in DxDesigner

    Hi,    I am wondering how to use Bus in Block interface when there are multiple nets in the Block and they have to be connected to another Block in the top level design. Any video or any document ...
    joniengr081
    last modified by joniengr081
  • Size of endpoint box

    I am using Xpedition 2.2, and I am struggling with unconnected, dangling nets.    The end of a net that is not connected has a small box, I believe it is referred to as the 'endpoint box'. With my current s...
    rod_mcinnis
    last modified by rod_mcinnis
  • Properties on symbols

    Hello,  When I bring a symbol out of DxBk , the symbols displays a list of "ALL" properties and values designated (est, 20 properties). This has just recently happened.    Please take a ...
    aiewould
    last modified by aiewould
  • how to convert orcad schematic into dxdesigner ??

    Hi everyone, i am new bie for dxdesigner.right now i am learning PADS design entry dxdesigner.in my design was fully drawn in orcad 10.1 so  i need to convert orcad schematic into dxdesigner or PADS Logic .how t...
    kabaleeswaran.K.R
    last modified by kabaleeswaran.K.R
  • Different component assembly in multiple instances of same block

    Hi, I've created a schematic block and I use it multiple times in my design. Now I need to have different component assembly (mounted/not mounted on PCB) for each block.   Is it possible to do that?
    guyse
    last modified by guyse
  • Importing Part from PCB file

    I have imported a Part from PCB file in Library Service in Library Manager. It only import the Cell but not the Symbol. In the Part directory under Symbol there is nothing. How to import Part together with Symbol and ...
    joniengr081
    last modified by joniengr081
  • How to create a component pin and connected Electrical net report

    PADS has a feature where one can export a list of a components pins and connected nets. I do not see this in Xpedition. I would like a list with pin names/numbers and electrical nets. (Electrical nets because we do no...
    jleine
    last modified by jleine
  • Composing Part from Multiple Symbols

    Hello,    I have multiple Symbols and one Cell. I need to compose a Part in Library Manager. Which document describe pin mapping, slot, and gate when creating new Part. 
    joniengr081
    last modified by joniengr081
  • How to copy property positions to a different part

    Hi,   as the topic already questions: How can I copy the property positions from one part to another? As an example: I have moved the properties of a resistor in two rows, because the net spacing is small. Now ...
    croscht
    last modified by croscht
  • Global Net Names in Instance Sheets

    Hi,    Is it possible to use global net names in Instance sheets of the blocks ? 
    joniengr081
    last modified by joniengr081
  • Schematic sheet editor help

    I have hierarchical design in designer VX 2.4. I have two instance of a block in the top level, when I create the pdf it shows the same name for both instance as sheet name. I would like to have in...
    joniengr081
    last modified by joniengr081
  • sch2pdf error [12140]

    Hi,  I get the error message when I export the schematic to PDF in VX2.4 Designer in WIndows 10. The error is attached. How to fix that ? 
    joniengr081
    last modified by joniengr081
  • Symbol type without Ref Designator

    Hi,    I am wondering to put a symbol in the schematic which does not need in the PCB layout. Is there any way to have such a symbol which is just used in schematic and not need to be packaged with cel...
    joniengr081
    last modified by joniengr081
  • View help for this messageError 1356: Cannot rename port . Component symbol is frozen and port to pin synchronization is enabled.

    How to resolve this issue ? I have given the port same name as the net name but still get this error.
    joniengr081
    last modified by joniengr081
  • Some settings are reset after each program launch

    For example, colored nets disappear, and "Unique names on copy" option will be changed (turned back on) everytime I restart DxDesigner. How can I make these setting be constant?
    kilometrix
    last modified by kilometrix
  • How to handle not used buses in hierarchical design

    We have multiple instances of a block and in some cases the buses will not be connected. Is there a nice way to handle this. I see one can create a bus of grounds: https://communities.mentor.com/message/51088 but ca...
    jleine
    last modified by jleine
  • Can I change the scroll speed in Xpedition Designer?

    I use Default Pan and Zoom setting, but the scroll speed is too low, so how can I make it faster? Should I change Windows scrolling settings or maybe there is an option to set scroll speed only for Xpedition Designer?
    kilometrix
    last modified by kilometrix
  • Symbols highlighted whenever schematic page is opened

    I am using Xpedition Designer v2.2.  Whenever I open a page in my schematic design, all symbols as well as the border are highlighted with a thick pink box around each part.  If I select the entire page, I c...
    nahikian
    last modified by nahikian
  • Add a netlist project - option missing

    I have installed VX2.6 AMS I want to create a netlist project, but the only option available to me in the project templates is the Xpedition flow.  How do I add a netlist flow project?
    darrell_teegarden
    last modified by darrell_teegarden