• Not able to print PDF in Xpedition

    Hi,    I am not able to print the schematic into PDF. I just define some stackup parameters in Layout and back annotated to schematic, then it does not work. 
    joniengr081
    last modified by joniengr081
  • How can you change PDF bookmark names?

    Hi, I could use some help on this. I found how to order pages properly in the PDF when using hierarchical design flow.   However, the bookmarks of the generated PDF only seems to use a concatenation of the @Name...
    oallaire
    last modified by oallaire
  • How to fix-> Data Source: "Parametric Data:ic_mem" needs your attention

    We updated to  X-ENTP VX.2.6 now anytime that I am working in a schematic i get this message for every partition in the library. If I click on Click here it opens a window asking for username and password. I ente...
    wayne_5757
    last modified by wayne_5757
  • Reuse of blocks from the blocks section

    Hello all,   can someone explain me in dxDesigner V2.5 how to reinsert a block from the block section in my hierarchy? Copy paste of the whole block is obviously not working. Creating a new local symbol result...
    croscht
    last modified by croscht
  • Deleting my part history in Xpedition

    Hi,   I am working on a big project. I am facing an issue with my part contents.    I need to delete my part history which was created by FPGA I/O Optimizer. I had created two test components in...
    joniengr081
    last modified by joniengr081
  • What is the difference between Variantmanager Files *_MA.vwd and *_CO.vwd?

    Hi,   I'm wondering, what the difference is between this two files. In one of my Xpedition Designer Projects, Variant Manager only create *_CO.vwd Files for each Variant, in an other project *_MA.vwd Files. I ca...
    michael.weber
    last modified by michael.weber
  • Xpedition FPGA I/O Optimizer - deleting part history

    I am wondering how to delete previous parts from Xpedition FPGA I/O Optimizer in VX 2.4. I have created a FPGA part in Xpedition FPGA I/O Optimizer and added it's symbols in Designer but every time...
    joniengr081
    last modified by joniengr081
  • Xpedition Designer VX2.4: Select all bus names on a sheet

    Hello community, I would like to change the size of all of the bus names on a sheet. Is there a possibility to select all of the bus names but not the net names?   Best regards,   Matthias.
    matthias.knauss
    last modified by matthias.knauss
  • 工程打不开cannot open the project of DXdesigner

    你好,打开dxdesigner工程之后,就关闭了,附件是dmp文件,帮忙看下是什么问题。 It close automatically when I open the template of project by DX desinger. the 
    rivers
    last modified by rivers
  • Viewing data sheet in an exported pdf

    Is there a way to use the link in the properties drop down menu of an exported pdf to open the data sheet and/or the cell drawing?
    dkrzmarcik
    last modified by dkrzmarcik
  • Why does my schematic lose page names when exporting to PDF?

    I'm having a problem when exporting a schematic to PDF from DX designer. All but the 1st page lose their page names. Any idea what setting I'm missing?
    andynic
    last modified by andynic
  • Refresh all refdes in block except fixed refdes

    Hi,   Is there a way to tell the packager to refresh all refdes in a hierarchical block (= block value + adding a refdessuffix in my case) except the symbols that have a frozen package property on them?   ...
  • Design capture VX.2.2 Page numbering

    Hi,    How to edit page numbers in design capture VX.2.2?  I have added and removed couple of page in between of the design pages, so the design pages are in the order of 3,4,5,6,7,8,9,10,12,13 ...
    ashif
    last modified by ashif
  • Design capture Compile warning page to page symbol connection

    I am connecting page to page power rail connection, On one page connecting Hierarchical block Symbol (one of the supply voltage is 16V) to 16V Vcc global on another page.  But I'am getting warning after com...
    ashif
    created by ashif
  • Importing window layouts (.wsp) from previous version of Xpedition Designer

    I just updated to Xpedition Enterprise X-ENTP VX.2.7 from 2.5 and I'm trying to import the window layout I was using in the previous version, so that I don't have to set up everything again (also for all the future up...
    l_pirnat_urqsq
    last modified by l_pirnat_urqsq
  • Property value

    Can I define a property value to be a something that will later fill from databook? For example, can I define the value for mfg_part_number to be MANUFACTURE_PN. And define a field MANUFACTURE_PN in the databook so th...
    peng
    last modified by peng
  • The Image file attached int the schematic is not showing in the archived file

    Hi  Currently I am using Designer VX.2.7. My problem is when I am archiving the project The image file included in the Schematic(Block diagrams, architecture) is not showing in the archived files. While opening t...
    sujin
    last modified by sujin
  • How to make a grouped BOM

    Is it possible to make a grouped BOM from Part Lister in DX Designer? I assume it would be possible to group the BOM on for example Product Number but how do I set up Part Lister for that?   BR, Johan
    johel572
    last modified by johel572
  • Finding mentor compatible part for Xpedition 

    Hi,  I am looking for mentor compatible part "surface mount RF transformer ADT1-1WT". I need to add symbol and footprint packaged as part. I have looked at Part Quest but don't find it there. Any idea ...
    joniengr081
    last modified by joniengr081
  • Broken net links in PDF

    When I export PDF from DxDesigner some of the hyperlinks for the net names are broken/don't go to the right place. I have checked the net names at both ends and they are the same, the netlist in the Quick connect vie...
    tgarman@kcp.com
    created by tgarman@kcp.com