• Issue with automation and authentication on company's EDM server

    Hi all,   We use the MGC tooling & automation to execute some processing steps on some software we develop; I'm not too familiar with the MGC family of tooling and have basic knowledge of the automation. ...
    leslieaerts
    last modified by leslieaerts
  • How to connect xDM Library with Oracle Cloud?

    We are currently running Xpedition VX2.4; but not using EDM flow. We are not able to connect our DX Central library with Oracle Cloud through Oracle client. Just like connectivity in between Central Library with ...
    sujoydey
    last modified by sujoydey
  • ALE 3.9.152/4 ... "open LMC" gives message "Cannot open this library type in this flow mode"

    ...... . (from task manager)..i have to kill the process in TM after this. . . . ALE will open the LMC if i open it 1st in the library manager tool and the "connect" to it with ALE.. Does this imply that ALE is...
    andyg
    last modified by andyg
  • Thermal pads with two vias as one pin

    Hello Folks, a fun question: The producer of a chip ask us to put an array of pads with two vias as the thermal pad. In the symbol they group the pads so that it only shows one pin per pad, even though it has two vi...
    milostnik
    created by milostnik
  • Adding circle in user defined layer for all thru hole pins in cell editor

    Hello All,   I would like to add circle (lets say 5mm from the edge of the pad) in user defined layer for all thru hole padstacks in cell editor. Right now i am adding it manually that is time consuming also cau...
  • How to map multiple library database (*.mdb) files to dxDatabook

    Sorry if this topic discussed already and, sorry again if this query sounds too basic.   Our library have multiple database files acc. to partitions, like CAPACITOR.mdb. I think only one mdb can be mapped to pr...
    pkulkarni
    last modified by pkulkarni
  • Login ID and Password for Optimum Library (starter)

    Hello Dear Team, I have a starter library of components for Xpedition aka Optimum Library, but then i try to use it i got an error:   Where can i get Login and password for this library? Thank you very much!
    krusty
    last modified by krusty
  • Cell Editor Dialog

    If you have voted for Idea D1521 or Idea D2327 in the past, or have any interest in them now, please go to Idea D8291, read the discussion, and if you agree, please vote up.  Thanks in advance.
    .-.--.--
    last modified by .-.--.--
  • Copy cell and edit it

    Hello, in version VX 2.5 I'm trying to copy a cell and edit the copy. Therefor I open the library manager from designer->tools and try to copy a cell, but that command is gray. Also the Cell edit on the top can no...
    eagle
    last modified by eagle
  • How to unlock a symbol?

    I am using Mentor Graphics EE 2007.9.4. Some symbol is mapped as a part and it get locked due to some reason. I can't the locked symbol in symbol editor. But it is visible when i placed that part in schematic. Ho to u...
    bmurali1011
    last modified by bmurali1011
  • Custom Web Services on VX.2.3

    Is anyone developing custom web services on EDM VX.2.3 Library Server? Is there documentation available to deploy on JBoss Web Server?
    trobison
    last modified by trobison
  • How to copy local project library in central library?

    Well, I got a zip-file of an Xpedition project which wasn't designed on our system. We want to modify the schematic and after packaging also the layout. Since all symbols and cells are not from our central library the...
    ati-phy
    last modified by ati-phy
  • Pin types on symbols for Dx/Ex flow.

    First, hope this is the correct location.   Second, I am getting gready to release a new library converted from an older Board Station library.  The pin types in the Board Station library were never used co...
    David_S
    last modified by David_S
  • How does your organization handle a Central Library

    We currently have a Central Library.  I have the usual partitions Resistors, Capacitors, IC, Connectors, et cetera.  We also do customer specific part partitions.  Does anyone do a central library that ...
  • Error adding symbol to EDM

    Hi Everyone, I'm having a problem uploading a new part symbol to EDM for new symbols and symbols that have existed and checked back in after check out. Currently, I'm creating a resistor symbol with the name 'Resisto...
    mpachol
    last modified by mpachol
  • PADs Professional Library Manager, Part Editor will not map more than one fractured symbol automatically

    Solution: keep your 2.3 installation ... you still need it (library is compatible between 2.4 and 2.3)
    phiet
    last modified by phiet
  • Part replacement

    Hi, We have just moved over to DxDesigner from Design Capture. We are also starting to use DxDatabook for the added BOM functionality. Does any body know an easy way of updating parts in a legacy design (migrated fro...
    andyrmanc
    last modified by andyrmanc
  • Xpedition and Office 365

    Hi,   We currently use a MS-Access database for Databook. We have Xpedition 32-bit VX2.3 and 32-bit MS-Office 2016.   Our company plans to migrate to Office 365 and our Drafting Dept plans to update to 64...
    Sorin-Stefan
    last modified by Sorin-Stefan
  • rotation arrows in cell editor

    Hi All,   Is there a way to turn of those annoying arrows in the VX2.4 cell editor?      
    charles.ietswaard1
    last modified by charles.ietswaard1
  • 3D generated model with different pitch, from 5m to 6m

    Hello Folks,   Playing with 3D view in Expedition Layout is fun. Since the introduction of the 3D model generator it is even better.   Now I have run into a issue that I would like to clarify.   We h...
    milostnik
    last modified by milostnik