• Custom Web Services on VX.2.3

    Is anyone developing custom web services on EDM VX.2.3 Library Server? Is there documentation available to deploy on JBoss Web Server?
    trobison
    last modified by trobison
  • How to copy local project library in central library?

    Well, I got a zip-file of an Xpedition project which wasn't designed on our system. We want to modify the schematic and after packaging also the layout. Since all symbols and cells are not from our central library the...
    ati-phy
    last modified by ati-phy
  • Pin types on symbols for Dx/Ex flow.

    First, hope this is the correct location.   Second, I am getting gready to release a new library converted from an older Board Station library.  The pin types in the Board Station library were never used co...
    David_S
    last modified by David_S
  • How does your organization handle a Central Library

    We currently have a Central Library.  I have the usual partitions Resistors, Capacitors, IC, Connectors, et cetera.  We also do customer specific part partitions.  Does anyone do a central library that ...
  • Error adding symbol to EDM

    Hi Everyone, I'm having a problem uploading a new part symbol to EDM for new symbols and symbols that have existed and checked back in after check out. Currently, I'm creating a resistor symbol with the name 'Resisto...
    mpachol
    last modified by mpachol
  • PADs Professional Library Manager, Part Editor will not map more than one fractured symbol automatically

    Solution: keep your 2.3 installation ... you still need it (library is compatible between 2.4 and 2.3)
    phiet
    last modified by phiet
  • Part replacement

    Hi, We have just moved over to DxDesigner from Design Capture. We are also starting to use DxDatabook for the added BOM functionality. Does any body know an easy way of updating parts in a legacy design (migrated fro...
    andyrmanc
    last modified by andyrmanc
  • Xpedition and Office 365

    Hi,   We currently use a MS-Access database for Databook. We have Xpedition 32-bit VX2.3 and 32-bit MS-Office 2016.   Our company plans to migrate to Office 365 and our Drafting Dept plans to update to 64...
    Sorin-Stefan
    last modified by Sorin-Stefan
  • rotation arrows in cell editor

    Hi All,   Is there a way to turn of those annoying arrows in the VX2.4 cell editor?      
    charles.ietswaard1
    last modified by charles.ietswaard1
  • 3D generated model with different pitch, from 5m to 6m

    Hello Folks,   Playing with 3D view in Expedition Layout is fun. Since the introduction of the 3D model generator it is even better.   Now I have run into a issue that I would like to clarify.   We h...
    milostnik
    last modified by milostnik
  • Adding User Draft Layers in the cell editor?

    Anyone know how to add a new draft layer while in the cell editor?   I know you can have them, as I have old boardstation partt that still have the layer I want to use, but I can't find any way to add them t...
    David_S
    last modified by David_S
  • ALE 3.9.152/4 ... "open LMC" gives message "Cannot open this library type in this flow mode"

    ...... . (from task manager)..i have to kill the process in TM after this. . . . ALE will open the LMC if i open it 1st in the library manager tool and the "connect" to it with ALE.. Does this imply that ALE is...
    andyg
    last modified by andyg
  • DRC friendly symbol creation - pin type

    Hello Folks,   The new symbol editor extended the possibility to add more specific pin types, as to improve on the DRC check performed on schematic. One of the improvement is the introduction of the pin type at...
    milostnik
    last modified by milostnik
  • Confirm the path of the Central Library

    For an existing project, without opening the project and getting a library error in DxDesigner, how can I inspect the project to determine if it is configured for my central library or another?
    charles_cunningham
    last modified by charles_cunningham
  • BL651 PCB Footprint

    How do I open this file? What software will I need? I know it was made using PADS. When I open it using notepad, it say:   "!PADS-POWERPCB-V5.0-BASIC-250L! DESIGN DATABASE ASCII FILE 1. *PCB* GENERAL PARAMETER...
    keem223
    last modified by keem223
  • Do you use revision control with DxDesigner/Expedition PCB flow ?

    Hello,   I would like to use revision control with EE7.9 but I find several issues so I would like to know wether or not you use revision control and if so, how you manage your library and projects.   The ...
    A.Ozenne
    last modified by A.Ozenne
  • Experiences with EDM Libary Server VX.2.3

    Does anyone have it running stable?   We migrated from DMS 7.9.5 to EDM Libary Server VX.2.3, but not directly. We had to migrate to EDM Libary Server VX.2.2 first, then afterwards to EDM Libary Server VX.2.3 &...
    thomasle
    last modified by thomasle
  • Library Migration for designed schematics

    I am working in Dx Designer with X-database library. Now I want to migrate to another library named as Y-library.Both are having different schematic symbol ( like pin order, mechanical pins are not visible in Y librar...
    ramachandran
    last modified by ramachandran
  • Full Control on Dispose Order in Search Preset

    We are looking for a way to enhance the Search Presets xDMLibrary so that it is possible to control the sequence in which the columns are displayed in the Result View. Currently the columns are displayed in random ord...
    frans.bos
    created by frans.bos
  • Connecting two pins in a cell

    Hi All,   In the cel editor I want to connect two pins to the same net. All the pins get a 'random' netname like net-1, net-2, etc. Is there a way to edit this netname and tie two pins to the same net.   ...