VX.2.4 Update 1~5 Release Notes

Version 1

    Problems Fixed in X-ENTP VX.2.4 Update 5


    EDM Design

    dts0101359150 - Could not deploy EDM Server in case of upgrading Oracle database


    Problems Fixed in X-ENTP VX.2.4 Update 4


    Xpedition Layout

    dts0101351178 - Backport changes to support Via to Pin intentional shorts in Forward Annotation.

    dts0101351183 - need keyin to convert plane data to conductive shapes to improve RB performance

    dts0101329519 - Zuken translator needs to be able to translate pins without padstacks as pins with a 1nm SMD padstack

    dts0101336179 - The Zuken translator needs to be able to map one Zuken layer to several Xpedition layers

    dts0101333560 - Cells with wirepad callout re translated as a fiducial in the cell.

    dts0101338950 - Soldermask shapes are not filled by translator

    dts0101333564 - Some custom layers not translated into User Draft Layers by default

    dts0101336543 - Enable mechanism to add Padstacks and Cells in the configured Central Library automatically

    dts0101307363 - Zuken translator needs to support the translation of star symbol/star via technology

    dts0101342241 - Ford Zuken design has tiebars with smd pads that are not pushed to the correct internal layers

    dts0101320448 - Tie bars translated from Zuken need to have the shorting set on the pins. Currently they are not and this causes opens

    dts0101349252 - When copying PTH via and pasting to another PCB design, Via span is going strange.

    dts0101323949 - When placing tie legs using "Place Thermal Override" most of tie legs disappear. if user close and open layout, it tie leg show again in design.

    dts0101345131 - Slowdown in Forward Annotation, preamble (misc[4]) load stage of ReOpenDocument

    dts0101349227 - Add via by layer change is going off pad origin in case of DRC off and Grid on.

    dts0101336334 - The setting values reflected from the Pad Stack Technology are not normally applied to the design.

    dts0101345066 - VIAs Change does not operate correctly in multi plow, VIA could change into VIA not defined in Setup Parameter.

    dts0101350529 - Optimization of netline (Reschedule Netline feature) does not work properly when copy and paste layout area.

    dts0101333897 - Diffirent behavior with Net lines for selected items option

    dts0101349242 - Trace shoving is not fully done, so it creates unnecessary space.

    dts0101350848 - Xtreme - Usage of temp directory can cause design to be unusable in Xtreme dession (due to an OS setting)

    dts0101354127 - wrong trace to plane clearance is used for adjacent rule areas

    dts0101349909 - Performance issue placing components in Package design

    dts0101353409 - Delay when moving a component in Xtreme

    dts0101350993 - Zuken translator deletes default via from library when using option "Import to Library"


    Xpedition Designer

    dts0101345000 - Switching central libraries reports an error


    Xpedition FabLink

    dts0101347445 - Multiline text overlaps in PDF when rotated 90 degrees


    Smart Utilities

    dts0101353992 - Area Cut Trace is removing net shorting from vias


    EDM Server

    dts0101340507 - To support this governmental DFARS requirement, support for TLS 1.0 must be disabled on all ports


    EDM Library

    dts0101349332 - Java error with Align function from Manage 3D Models Modify


    I/O Optimizer

    dts0101353214 - Mismatch between signal and pin views displaying different assignments when they should be identical.


    Problems Fixed in X-ENTP VX.2.4 Update 3


    EDM Design

    dts0101344982 - Changes for user defined columns for Variant meta-data are not saved


    EDM Server

    dts0101352852 - Add the Teamcenter server URL in the server configuration as well as in Web Admin

    dts0101352867 - Support passing the session information in the secured way


    EDM Web

    dts0101352850 - EDM Collaborate Embedded Active Workspace in the Object Detail page

    dts0101352849 - Support baseline creation in EDM Collaborate


    Problems Fixed in X-ENTP VX.2.4 Update 2


    Xpedition Layout

    dts0101346186 - Display Control becoming Non-responsive.

    dts0101345021 - Xtreme – Issue with Forward Annotation

    dts0101322211 - The plane shape has created out of boundary from Route border.

    dts0101340485 - planes is not longer filling in tiny plane shape

    dts0101343324 - Plane fill changed on a plane shape with a special arc geometry after a part (U2) is moved in DRC off mode

    dts0101341151 - xPCB Layout - ECO > Update cells and Padstacks fails to update cell - reports invalid via span

    dts0101347664 - Imported DXF is incorrect


    Xpedition Designer

    dts0101339075 – Issue when exiting Designer and there is a custom script still running, invoked from a custom menu.

    dts0101330405 - Sheet order changed after importing a netlist project to an integrated flow project.



    dts0101341756 - Support ADMS18.2 on XpeditionAMS VX2.2 because of full supporting Win10 platform


    Problems Fixed in X-ENTP VX.2.4 Update 1


    Xpedition Layout

    dts0101321606 - Cannot cancel dragging box.

    dts0101328817 - When user pushes buried cells to inner layer, some cells are rotated

    dts0101328821 - When pushing a buried cell, connected traces and vias also seem to be pushed, and rotated unintentionally.

    dts0101323273 - Layout user cannot route traces near specific pad of part which shape is diagonal.

    dts0101328625 - The Reschedule netline option does not work in some cases.

    dts0101328819 - When user applies buried cell, unexpected text is generated, and it looks like a short.

    dts0101331260 - The Violation trace has disappeared during trace shove.

    dts0101338929 - Multi-selection of vias allows invalid selection of spans in Padstack Properties

    dts0101337058 – Issue with Xpedition on Plow (ExpeditionPCB!cNetLineMarkPlow::Mark)

    dts0101339208 - Cannot cancel dragging box in active-object Plow and Move commands

    dts0101340131 - Design mismatch between Dynamic plane and Gerber output.

    dts0101340534 - xPCB Layout - Interactive Routing performance needs to be faster in this large design.

    dts0101341304 - X-ENTP: MCAD Collaborator shows warning and then error message when starting - Chinese language specific.

    dts0101336784 – Issue with Xtreme session on open in WBToolkit OnOpenDocument if not using xtremedsessionf license

    dts0101333914 – Issue with Xtreme session, if the license is not available

    dts0101343610 - Export Board (Schematic and PCB) should require 'read', not 'write' permission for the board hierarchy

    dts0101308666 - Zuken translation with no pads on through holes creates opens in plane data

    dts0101308667 - Zuken Translator needs to set via in pad and via offset in pad setting as to not create opens during translation

    dts0101337506 - Zuken footprint edits in a design are not being translated. The footprint data from the ftf file is what is being used

    dts0101336536 - Make a mechanism of Padstack.hkp and Cell.hkp creation more robust

    dts0101332426 - Zuken design fails to translate properly. The parts have two slots and a SMD pad to make up the 3 pins.

    dts0101333545 - Enable option to specify units of the cell

    dts0101333562 - Starpoint fails in translation.

    dts0101336189 - Zuke translator fails if there are not clearances set up in a design rule stack

    dts0101333707 - The Height of the cell is translated inaccurate; use compAreaTopHeight optionally

    dts0101333629 - Enable cell properties translation

    dts0101333605 - Some Route and Via obstructs are missing in some cells


    Smart Utilities

    dts0101331031 - After running the ZigZag Routing, some traces appear extended traces and bring violations


    I/O Optimizer

    dts0101341957 - Loading into floorplan window has memory problem on 32-bit OS

    dts0101339319 - Unable to open existing IOPT Floorplan and unable to create IOPT floorplan: schematic, layout and IOPT in sync


    EDM Design

    dts0101339957 - "View" with authoring tool, executed from Version List views always the last version (regardless of the version chosen)

    dts0101341624 - TC-EDM Integration: Error while copying file to EDX inbox queue


    EDM Server

    dts0101341275 - Remote Master Vault EDM Server with SSL deployment doesn't work


    EDM Library Tools

    dts0101311251 - Symbol Editor, Inverted Property has issue

    dts0101344227 - attempting to map cell pins to symbol in pdb editor results in The pin numbers associated with are incompatible with the previously assigned cell.


    Xpedition Designer

    dts0101312000 - xDesigner "Assign Refdes" function creates duplicate ref Des assignments causing packager failure

    dts0101339075 - Issue when exiting Designer and there is a custom script still running, invoked from a custom menu.

    dts0101329102 - Memory usage increases when running with Automation commands


    Xpedition Systems Designer

    dts0101321238 - The Xpedition System Designer product is checking out a xdesigner201_c license instead of xdesigner301_c

    dts0101345016 - Deliver 4 DRCs