0 Replies Latest reply on Oct 26, 2014 6:05 AM by agxinmj

    ces length matching



             I am using a ddr 3 in my design

      since in it is being operated at very high speed 1866 Mt/s,to get the best performance  with a 5 ddr chips connected to an fpga i need to do layer by layer stub matching as recommended by the ddr vendor

      how to set constrains such that the length from bga of ddr to fan out stub to be equal in all layers for address lines

      i need the length from controller to chip 1 and from chip one to chip 2 and from chip2 to chip 3 and from chip 3 to chip 4 and from chip 4to chip 5 to be equal

      is it possible to set constrain such that the length from one chip to other to be equal in all layer where ever it is routed matching should include layer stub length in it ,when routed in different layer

      how to create constrain for this







      address and command control group -lines

      u1-termination -length -equal(top stub equal)

      u2-u1-length -equal (top stub equal)

      u3-u2-length-equal(top stub equal)

      u4-u3-length- equal(top stub equal)

      u5-u4-length -equal(top stub equal)

      u6-u5-length -equal (top stub equal)

      for all this when the signals routed in two different layers layer stub should get added from the layer thickness (4-8 mills)for the above layer

      how to set all the data lanes to the maximum of 600 mils which should also have uniform top stub

      if any one has idea on this please help me

      thanks in advance for those who are helping