7 Replies Latest reply on Apr 18, 2013 1:43 AM by robert_davies

    error in dxdesigner in due to duplicate part ??

    kabaleeswaran.K.R

      Hi everyone,

       

      i faced some error in my design i could not find the duplicate i am using one part in my design please anyone clear my doubt

      pcb: Note 6049: Schematic1 com $1I100: Repacking (duplicate slot)

      pcb: Note 6049: Schematic1 com $1I79: Repacking (duplicate slot)

      pcb: Note 6049: Schematic1 com $1I79: Repacking (duplicate slot)

      pcb: Note 6049: Schematic1 com $2I102: Repacking (duplicate slot)

      pcb: Warning 6083: Schematic1 pin $2I377.1: Single pin net: $2N386

      pcb: Warning 6083: Schematic1 pin $2I359.1: Single pin net: $2N354

      pcb: Warning 6083: Schematic1 pin $2I139.1: Single pin net: $2N171

      pcb: Warning 6083: Schematic1 pin $2I83.1: Single pin net: $2N132

      pcb: Warning 6094: Schematic1 pin $2I98.1: Pin not connected

      pcb: Warning 6094: Schematic1 pin $2I98.2: Pin not connected

      pcb: Error 6052: Schematic1 com $1I79: Duplicate name: $1I79

      pcb: Error 6052: Schematic1 com $1I79: Duplicate name: $1I79

      pcb: Error 6052: Schematic1 com $1I140: Duplicate name: $1I140

      pcb: Error 6052: Schematic1 com $1I140: Duplicate name: $1I140

      pcb: Error 6052: Schematic1 com $1I139: Duplicate name: $1I139

      pcb: Error 6052: Schematic1 com $1I139: Duplicate name: $1I139

      pcb: Error 6052: Schematic1 com $1I138: Duplicate name: $1I138

      pcb: Error 6052: Schematic1 com $1I138: Duplicate name: $1I138

      pcb: Error 6052: Schematic1 com $1I137: Duplicate name: $1I137

      pcb: Error 6052: Schematic1 com $1I137: Duplicate name: $1I137

      pcb: Error 6052: Schematic1 com $1I136: Duplicate name: $1I136

      pcb: Error 6052: Schematic1 com $1I136: Duplicate name: $1I136

      pcb: Error 6052: Schematic1 com $1I100: Duplicate name: $1I100

      pcb: Error 6052: Schematic1 com $1I100: Duplicate name: $1I100

        • 1. Re: error in dxdesigner in due to duplicate part ??
          manikandan.alagarsamy

          Hi,

          I see there is a possibility of some issue with the Part (PDB) you have created. Make sure all the parts are OK.

          Possible error can be, in any part if you faced any problume with symbol, don't replace the symbol in the PDB, delete the PDB and create a new, if you just replace the symbol it can create a duplicae slot.

           

          Just try.

           

          Thanks & Regards

           

          Manikandan.

          • 2. Re: error in dxdesigner in due to duplicate part ??
            kabaleeswaran.K.R

            Hi mani,

            Thanks for your reply, still i could not clear my error i followed your point

             

            is not possible to use same symbol for different package ??

            what is the different between in both the symbol check image

             

            pcb: Note 5996: Using Config File C:\MentorGraphics\2007.4PADS\SDD_HOME\standard\pads2007.cfg

            pcb: Note 6062: Schematic1 sym FPF2100: REFDES=u?: Changing property value to U?

            pcb: Note 6057: Schematic1 sym DISCRETES:CAP: PKG_TYPE=: Bad property value

            pcb: Error 6035: Illegal length 0

            pcb: Note 6057: Schematic1 sym DISCRETES:CAP: DEVICE=: Bad property value

            pcb: Error 6035: Illegal length 0

            pcb: Note 6062: Schematic1 sym BERG1X2: REFDES=J: Changing property value to J?

            pcb: Note 6062: Schematic1 sym CONNECTOR27: REFDES=J: Changing property value to J?

            pcb: Note 6062: Schematic1 sym LM1117: REFDES=: Changing property value to U?

            pcb: Note 6057: Schematic1 sym PREVIEW:CAP1206: PKG_TYPE=: Bad property value

            pcb: Error 6035: Illegal length 0

            pcb: Note 6057: Schematic1 com $5I2: REFDES=u?: Bad property value

            pcb: Error 6034: Illegal character u

            pcb: Warning 6083: Schematic1 pin $2I377.1: Single pin net: $2N386

            pcb: Warning 6083: Schematic1 pin $2I359.1: Single pin net: $2N354

            pcb: Warning 6083: Schematic1 pin $2I139.1: Single pin net: $2N171

            pcb: Warning 6083: Schematic1 pin $2I83.1: Single pin net: $2N132

            pcb: Warning 6094: Schematic1 pin $5I2.ON: Pin not connected

            pcb: Warning 6094: Schematic1 pin $2I98.1: Pin not connected

            pcb: Warning 6094: Schematic1 pin $2I98.2: Pin not connected

            pcb: Note 5626: Summary of pcb.err

            • 3. Re: error in dxdesigner in due to duplicate part ??
              torsten_nitschke

              Hi,

               

              pcb: Note 6057: Schematic1 sym DISCRETES:CAP: PKG_TYPE=: Bad property value

              pcb: Error 6035: Illegal length 0

              pcb: Note 6057: Schematic1 sym DISCRETES:CAP: DEVICE=: Bad property value

              pcb: Error 6035: Illegal length 0

               

              This error means that you have a symbol in your schematic with a empty package type and device property.

              Without this properties the packager is not able to forward the symbol information to the layout program.

              If you using PADS Layout as backend the packager needs to get the device ( Partnumber ) and PKG_TYPE ( footprint ) to get the right Decal for the layout.

              Please add a valid partnumber and pkg_type to the symbol properties.

              Of course you can use a symbol for more than one part, but the difference is the partnumber ( device) which is the unique identifier.

               

              Thanke,

              Torsten

              • 4. Re: error in dxdesigner in due to duplicate part ??
                kabaleeswaran.K.R

                Hi,

                Thanks for your reply,i tried my level best but i could not correct the error below i shown.package type i entry still i could not understand the problem.

                 

                i could not understand red color i marked error,please for this post

                 

                pcb: Note 6062: Schematic1 sym FPF2100: REFDES=u?: Changing property value to U?

                pcb: Note 6062: Schematic1 sym BERG1X2: REFDES=J: Changing property value to J?

                pcb: Note 6062: Schematic1 sym CONNECTOR27: REFDES=J: Changing property value to J?

                pcb: Note 6057: Schematic1 sym DISCRETES:CAP: PKG_TYPE=: Bad property value

                pcb: Error 6035: Illegal length 0

                pcb: Note 6057: Schematic1 sym DISCRETES:CAP: DEVICE=: Bad property value

                pcb: Error 6035: Illegal length 0

                pcb: Note 6062: Schematic1 sym LM1117: REFDES=: Changing property value to U?

                pcb: Note 6057: Schematic1 com $1I18: Tolerance=: Bad property value

                pcb: Error 6035: Illegal length 0

                pcb: Warning 6094: Schematic1 pin $5I21.N1: Pin not connected

                pcb: Warning 6094: Schematic1 pin $5I21.N2: Pin not connected

                pcb: Warning 6094: Schematic1 pin $5I17.N1: Pin not connected

                pcb: Warning 6094: Schematic1 pin $5I17.N2: Pin not connected

                pcb: Note 5626: Summary of pcb.err

                Status 0, Notes 8, Warnings 8

                Errors 3, Failures 0, Fatals 0, Internals 0

                • 5. Re: error in dxdesigner in due to duplicate part ??
                  torsten_nitschke

                  Hi,

                   

                  the part in the attached picture looks well, anyway please check the following TechNote.

                   

                  http://supportnet.mentor.com/reference/technotes/public/technote.cfm?id=MG247030

                   

                  Also is there any other CAP Symbol in the design without a property value for PKG_TYPE?

                   

                  Thanks

                  Torsten

                  • 6. Re: error in dxdesigner in due to duplicate part ??
                    kabaleeswaran.K.R

                    Hi,

                    Thanks for your reply. i could not access the link because i am in guest in support net .so is it possible to post  technical note??? if you don't mind

                    • 7. Re: error in dxdesigner in due to duplicate part ??
                      robert_davies

                      It is not Mentor's policy to publish Tech Notes and other support material on Communities. If you need access to these materials then simply register with SupportNet.

                       

                      Rob

                       

                      If you think training is expensive, you should try ignorance!