Try Srx and Sry command
Thanks for your reply.i need to use keyboard command is it possible ??
serch in help at tool itselp.....
This is not Allegro. Forget about Allegro commands. Learn how to use PADS.
There are several commands that affect the origin, what you select, and how it's moved. Learn them, and find the combination you need.
There is the Set Origin command. You can select a pin, a part, a 2D line, or just any point you want, and reset the origin. Now all moves and distances are relative to the new origin, and this greatly simplifies constructing complicated shapes or placing critical components. When you're done, reset the Origin to where you had it before.
The status line on the bottom of the screen will give you both the relative and absolute co-ordinates of your move.
There is the Move preferences settings. You can move by origin of the part you select, by midpoint of a 2D line, or by cursor location. Select whichever is most helpful to you.
When selecting more than one part to move, the first one you select will determine the origin of the group.
You can change your grid to be an evenly divisible portion of your move distance, and x and y grids can be different values.
Once you have selected your parts, Ctrl+E is the easiest command to start the move. You can then use the cursor to make the move, and the space bar to place them.
If you can't get the exact distance using the cursor, for example the grid is set to 1 mil, the selection jumps from 124 mils to 126 mils, and you need 125 mils, zoom in for more precise control.
And as Angamuthu has pointed out, there's a wealth of modeless commands that you'll find helpful for this and many other things.
Play and learn.