i need to create Mechanical pin in PADS2005.how to create ??in allegro,mechanical pin have not pin number like that how can i create ??
If you want a hole for this pin you need to build it as a decal and use a terminal so you can assign a drill size. You can keep it from being affected by ECO by making it a Non-ECO Registered part.
Please see this Tech Note and video for the basic steps:
If you don't need a hole you can draw the pad from Copper directly on the board.
Thanks for your reply.while creating mechanical symbol pin number should not come (default pin no is enabled) is it possible ??
The pin number should not appear on the board unless you have Pin Numbers turned on in Display Colors, if you have that feature. You won't see it in the Gerber file. If you are concerned about the ref des label showing you can delete it in the decal or on the board.
Thanks for your reply.
i have the parts i need to create like that but in pads logic i need to keep only 12 pins only i need to add 12 mechanical pins i don't want to add pins in pads logic (with out adding pins how to create mechanical pin in Library )
A layout decal can have more pins than a part/symbol uses. That is not a problem. So if you have four mounting holes for your part, they don't have to be part of the schematic (unless you want them as part of a net).
Retrieving data ...