5 Replies Latest reply on Aug 18, 2015 1:16 AM by robert_davies

    If multiple Gate IC want to display the Power Pin in a Gate ,how to do the PDB?

    yth

      If multiple Gate IC want to display the Power Pin in a Gate ,how to do the PDB?  For example, One Dual Operational Amplifier, I want to divide the symbol two parts, one display Power Pin, the other not display, and the two Gate could do Gate Swap. If import two different symbol in the PCB , one has op_power.1 with Power Pin, the other is op.1 without Power Pin,  op_power.1 and op.1 place one in the schematic, then Pin No of the two symbols are same, that is the same slot,  can not name the two symbols U1 and put in the device.  If use op.1 and op.2 respectively show Power Pin Gate and not Power Pin Gate,   under the condition of Power Pin hung up in the schematic, there is no problem doing Gate Swap in the Packager and PCB, but once the Power Pin connect to the net, then the Packager will has mistake, meaning as requiring divice’s all Power Pin of different Gate connect to the same net, but we have two Gate ,one has Power Pin, the other not , so can’t get to the requirement. How to achieve the result of I want?