I am using Pads VX1.2 DxDesigner integrated flow.
I have a large copper pour used for heatsinking. I need the pour backoff to be larger than the design rules.
How can I set the clearance for this copper pour?
You should install VX.2. Here are the updates for Integrated Projects
In a continued effort to reduce the differences between the Netlist and Integrated projects, the following functionality was added for Integrated projects:
• Associated/Electrical Nets
• Virtual Pins
• Board Edge Clearance to Via, Pad, Trace and Copper
• Copper Clearance to Via, Pad, SMD, Trace and Copper
Thanks for the reply.
I will look into this and install VX 2.0.
Retrieving data ...