Does anyone have a good way to do this kind of components with one schematic connection to multiple pins in layout? When we used mentor logic we used a feature called signal pins, this was not the best but it worked. If I try to use signal pins in xdxdesigner (integrated flow) the signal pins are not working in the same way cause the net name is not changeable from schematic, it has to be hard set in the part editor. Then there is this TECHNOTE "MG50685" but this seems really crappy as swell. And yes there is the way of doing a form of connection comb but this looks horrible.
Do anyone have a way to solve/do this that makes the schematic look like its done this millennium.