Hi,

I added on one project a reuse file by select of all and save the reuse file.

Now I pushed the button on the origin layout to use make reuse. It got insert as it should.

But now I deleted the reuse file and want to create a new one. But I get every time this message:

Selection does not include items valid for inclusion into a reuse. Retry your selection.

Make Reuse Report --Mon Feb 3 14:08:26 2020

Design File: debug_board.pcbItems removed from selection:

Net D2 (pin pair: 1, total pins: 14, component pins: 2) (private for reuse SDIO_V0_1_1 of type sdio_v0.1)

Net D3 (pin pair: 2, total pins: 16, component pins: 3) (private for reuse SDIO_V0_1_1 of type sdio_v0.1)

Net VDD (pin pair: 4, total pins: 20, component pins: 5) (private for reuse SDIO_V0_1_1 of type sdio_v0.1)

Net VSS (pin pair: 9, total pins: 28, component pins: 10) (private for reuse SDIO_V0_1_1 of type sdio_v0.1)

Net CLK (pin pair: 1, total pins: 17, component pins: 2) (private for reuse SDIO_V0_1_1 of type sdio_v0.1)

Net CMD (pin pair: 1, total pins: 17, component pins: 2) (private for reuse SDIO_V0_1_1 of type sdio_v0.1)

Net D0 (pin pair: 1, total pins: 16, component pins: 2) (private for reuse SDIO_V0_1_1 of type sdio_v0.1)Unrouted - from (x = 27.473 y = 9.64662) to (x = 27.35 y = 9.32362)(net D2 , pin pair R2.1-CN2.1)

Unrouted - from (x = 24.727 y = 9.64662) to (x = 25 y = 9.5)(net D2 , pin pair R2.1-CN2.1)

Unrouted - from (x = 21.873 y = 9.00062) to (x = 21.48783 y = 9.01161)(net D2 , pin pair R2.1-CN2.1)

Unrouted - from (x = 19.127 y = 9.64662) to (x = 19.127 y = 9.643)(net D2 , pin pair R2.1-CN2.1)

Unrouted - from (x = 21.873 y = 9.643) to (x = 19.25 y = 9.32)(net D2 , pin pair R2.1-CN2.1)

Unrouted - from (x = 19.127 y = 8.37662) to (x = 19.127 y = 8.373)(net D3 , pin pair R3.1-CN2.2)

Unrouted - from (x = 21.873 y = 7.73062) to (x = 21.8984 y = 8)(net D3 , pin pair R3.1-CN2.2)

Unrouted - from (x = 24.7016 y = 8.37662) to (x = 24.727 y = 8.37662)(net D3 , pin pair R3.1-CN2.2)

Unrouted - from (x = 27.473 y = 8.37662) to (x = 27.35 y = 8.05362)(net D3 , pin pair R3.1-CN2.2)

Unrouted - from (x = 19.25 y = 8.05) to (x = 21.873 y = 8.373)(net D3 , pin pair R3.1-CN2.2)

Unrouted - from (x = 24.7016 y = 5.5) to (x = 24.727 y = 5.19062)(net VDD , pin pair CN2.4-C1.2)

Unrouted - from (x = 21.873 y = 5.19062) to (x = 21.8 y = 5.2)(net VDD , pin pair CN2.4-C1.2)

Unrouted - from (x = 21.873 y = 5.83662) to (x = 21.873 y = 5.833)(net VDD , pin pair CN2.4-C1.2)

Unrouted - from (x = 19.127 y = 5.187) to (x = 19.25 y = 5.4)(net VDD , pin pair CN2.4-C1.2)

Unrouted - from (x = 27.35 y = 5.51362) to (x = 27.473 y = 5.83662)(net VDD , pin pair CN2.4-C1.2)

Unrouted - from (x = 19.127 y = 3.293) to (x = 19.127 y = 3.29662)(net VSS , pin pair C1.1-CN2.6)

Unrouted - from (x = 21.8984 y = 2.9) to (x = 21.873 y = 2.65062)(net VSS , pin pair C1.1-CN2.6)

Unrouted - from (x = 24.82022 y = 3.12224) to (x = 24.727 y = 3.29662)(net VSS , pin pair C1.1-CN2.6)

Unrouted - from (x = 27.3 y = 3) to (x = 27.473 y = 3.29662)(net VSS , pin pair C1.1-CN2.6)

Unrouted - from (x = 19.24012 y = 2.94647) to (x = 21.873 y = 3.293)(net VSS , pin pair C1.1-CN2.6)

Unrouted - from (x = 19.127 y = 4.56662) to (x = 19.127 y = 4.563)(net CLK , pin pair CN2.5-SD1.5)

Unrouted - from (x = 21.873 y = 3.92062) to (x = 21.8984 y = 4)(net CLK , pin pair CN2.5-SD1.5)

Unrouted - from (x = 24.727 y = 4.56662) to (x = 24.7016 y = 4.5)(net CLK , pin pair CN2.5-SD1.5)

Unrouted - from (x = 27.473 y = 4.56662) to (x = 27.42254 y = 4.29575)(net CLK , pin pair CN2.5-SD1.5)

Unrouted - from (x = 19.25 y = 4.3) to (x = 21.873 y = 4.563)(net CLK , pin pair CN2.5-SD1.5)

Unrouted - from (x = 19.127 y = 7.103) to (x = 19.21088 y = 6.76508)(net CMD , pin pair CN2.3-SD1.3)

Unrouted - from (x = 21.873 y = 7.103) to (x = 21.86902 y = 7)(net CMD , pin pair CN2.3-SD1.3)

Unrouted - from (x = 19.127 y = 7.10662) to (x = 19.28695 y = 6.7159)(net CMD , pin pair CN2.3-SD1.3)

Unrouted - from (x = 24.727 y = 7.10662) to (x = 24.84592 y = 6.5)(net CMD , pin pair CN2.3-SD1.3)

Unrouted - from (x = 27.473 y = 7.10662) to (x = 27 y = 6.7)(net CMD , pin pair CN2.3-SD1.3)

Unrouted - from (x = 19.127 y = 2.023) to (x = 19.25 y = 1.7)(net D0 , pin pair CN2.7-SD1.7)

Unrouted - from (x = 21.873 y = 2.023) to (x = 21.8 y = 2)(net D0 , pin pair CN2.7-SD1.7)

Unrouted - from (x = 19.127 y = 2.02662) to (x = 19.00595 y = 1.67652)(net D0 , pin pair CN2.7-SD1.7)

Unrouted - from (x = 24.727 y = 2.02662) to (x = 24.7016 y = 1.5)(net D0 , pin pair CN2.7-SD1.7)

Unrouted - from (x = 27.473 y = 2.02662) to (x = 27.1 y = 1.6)(net D0 , pin pair CN2.7-SD1.7)Reuses SDIO_V0_1_1 at (x = 0 y = 4.9) (Reuse Type: sdio_v0.1)

==============================================

Total 43 items:

7 Nets

35 Unrouted

1 Reuse

So how to remove the SDIO_V0_1_1 from the layout to be able to create a new reuse part?

I use PADS flow VX.2.6. I also do not find anything in reuse folder nor in the library!?

EDIT:

In the PCB files itself is something found about sdio_v0.1 and SDIO_V0_1_1.

But how to remove it from PCB file?