I am simulating differential signal that topology is IC to Connector.
if i connect the termination resistor in output side the connection aero mark color showing crisscrossing(in this issue impact on my oscilloscope name .
Could you please help me
LineSim assigns differential probes automatically based on the connection of differential symbols. These symbols can be differential buffers or IBIS components with [Diff Pair] data. Then there is optional information (!CONNECT) in Touchstone files that declare logical connections between ports. It appears that you have some combination of these elements in your schematic. What is the resulting view that you want?
Thanks for your response my topology is IC(IBIS model),common mode choke (S parameter) and end point is connector(s parameter) so in the connector output side i terminate 90 ohm resistor and trying to see the result(eye diagram) but in the oscilloscope prodding option shows port 1 and port 10(crisscross) are connected but i need port1 and port2(input side ),port 9 and port 10( output side) like wise.
I don't know what caused the assumption of those pins as differential, but you can disable the view of those curves and create the differential pairs that you want. Double-click the row that says <Insert diff probe> and select the pins that you want to pair.
Retrieving data ...