1 Reply Latest reply on Nov 2, 2009 6:44 AM by yu.yanfeng

    Can't combine 3 nets into an Enet ?

    yu.yanfeng

      The design is very simple,  there are 3 signal nets and 2 global signals. It's a keyin flow and it seems no error in the setting.

      ;; V4.1.0
      %net
      %Prior=1

      %page=0001
      \DM1_VP_CLKOUT\    \D3\-\P1\ \R238\-\1\
      \GND\    \C130\-\2\ \D3\-\AE1\ \D3A1\-\V6\
      \UNNAMED_11_CAPACITOR_I30_A\    \C130\-\1\ \R238\-\2\ \R239\-\1\
      \UNNAMED_11_RESISTOR_I29_B\    \D3A1\-\AA9\ \R239\-\2\
      \VCC_3V3\    \D3\-\AD1\ \D3A1\-\V8\

      %Part
      \CAPACITOR_0603-06035A100DAT2A,10P\    \C130\
      \EP2C35F672-EP2C35F672\    \D3\
      \RESISTOR_0603-2322 704 01829,18.2,1%\    \R238\ \R239\
      \TMS320DM6467-TMS320DM6467ZUT\    \D3A1\

        • 1. Re: Can't combine 3 nets into an Enet ?
          yu.yanfeng

          What the problem? Something wrong in the PDB? I don't give the anwser immediatly, just  the tip to find the problem.

           

          Open CES's Powers and Grounds difinition and delete all difinition, now you will find GND have 8 pins and VCC_3V3 have 4 pins. From the kyn netlist, GND only have 3 pins and VCC_3V3 have 2 pins.

           

          Yanfeng