2 Replies Latest reply on Feb 29, 2012 6:16 AM by robert_davies

    Project Migration from 2007 DxD to 2010 DxD

    sureshkhumar.jeevan.ext

      i am using pads 9.3 dxdesigner ....unable to import a dxdesigner2007 project file in to 9.3, following migration log is generated during the import...

       

      *******************************************************************************************************

      Migration log file

      00:00:00 Starting Migration

      00:00:00 old file backup

      00:00:00 Project configuration files are being read...

      00:00:00 Parse .dproj file

      00:00:00 Parse .dproj file: done

      00:00:00 CDB flow is not used. Migrate as NETLIST flow...

      00:00:00 The following schematics found in C:\Documents and Settings\jsuresh.L1ID\Desktop\PCA, DRACO CAMERA (200-473)\:

      00:00:00 'palmcam1000.1' 'palmcam1000.2' 'palmcam1000.3'

      Reading navigator.ini for getting root block name

      navigator.ini cannot be opened

      The following schematics found in C:\Documents and Settings\jsuresh.L1ID\Desktop\PCA, DRACO CAMERA (200-473)\:

      '65lvds1.1' '65lvds2.1' '65lvds386.1' 'ads5240.1' 'BORDERC.1' 'borderc.2' 'buf602.1' 'cap0603.1' 'cap3216.1' 'capsmdp.1' 'con20.1' 'CON2L.1' 'con30.1' 'con40.1' 'con50.1' 'da1206c.1' 'da1206c.2' 'dl-12m25-3t.1' 'GND.1' 'ibis4-1400.1' 'INDSMD.1' 'LED.1' 'mcp1253.1' 'osc2smd.1' 'r0603.1' 'ths4520.1' 'tlv431adbv.1' 'TPOINT.1' 'tps61200.1' 'tps79401.1' 'tps79601.1' 'vdd.1' 'vdd_a.1' 'vdd_ar.1' 'vdd_i.1' 'vdd_r.1' 'vdd_tr.1' 'xform_wbc1_1.1'

      Checking wir files...

      00:00:00 The following schematics found in C:\Documents and Settings\jsuresh.L1ID\Desktop\PCA, DRACO CAMERA (200-473)\:

      00:00:00 'palmcam1000.1' 'palmcam1000.2' 'palmcam1000.3'

      palmcam1000.1

      palmcam1000.2

      palmcam1000.3

      00:00:01 Parse Viewdraw.ini file

      The following user-specific settings are defined in the project:

      ADISTANCE: 0

      WINDOW_BACKGROUND: 15 0 0

      SELECTION_LAYER: 7 0 0

      BORDER_LAYER: 0 0 0

      COMPONENT: 1 0 0

      ATTRIBUTE: 1 0 0

      LABEL: 2 0 0

      TEXT: 5 0 0

      The settings above have not been maintained during migration and it should be reset once the project has been opened. Note changing these settings will affect all projects that you open but do not affect the data in the project.

      00:00:01 Generating WIR files...

      00:00:01 The following schematics found in C:\Documents and Settings\jsuresh.L1ID\Desktop\PCA, DRACO CAMERA (200-473)\:

      00:00:01 'palmcam1000.1' 'palmcam1000.2' 'palmcam1000.3'

      00:00:01 Generating WIR files: done

      00:00:01 CProjectMigration::OpenICDB()

      00:00:01 iCDB opened successfully

      00:00:01 AddSnapshot successful

      00:00:01 Design blocks conversion

      00:00:01 The following schematics found in C:\Documents and Settings\jsuresh.L1ID\Desktop\PCA, DRACO CAMERA (200-473)\:

      00:00:01 'palmcam1000.1' 'palmcam1000.2' 'palmcam1000.3'

      00:00:01 Adding block palmcam1000.1

      00:00:01 Adding block palmcam1000.2

      00:00:01 Adding block palmcam1000.3

      00:00:02 Error: Default configuration for palmcam1000.1 cannot be created:

      viewbase: Error 222: Error - Could not find WIR file TPS79601.1.

      00:00:02 Migration stopped because schematics cannot be migrated to iCDB

       

      *******************************************************************************************************

       

      Can someone help me in opening the project with the new version of DxD?

       

        • 1. Re: Project Migration from 2007 DxD to 2010 DxD
          jorge2787

          Hi, I have same problem

           

          i am using PAD 9.3.1

           

          Migration log file

          00:00:00 Starting Migration
          00:00:00 old file backup
          00:00:00 Project configuration files are being read...
          00:00:00 Parse .dproj file
          00:00:00 Parse .dproj file: done
          00:00:00 CDB flow is not used. Migrate as NETLIST flow...
          00:00:00 The following schematics found in C:\Users\Jorge\Desktop\rdf0038\:
          00:00:00 'sp605.1' 'sp605.10' 'sp605.11' 'sp605.12' 'sp605.13' 'sp605.14' 'sp605.15' 'sp605.16' 'sp605.17' 'sp605.18' 'sp605.19' 'sp605.2' 'sp605.20' 'sp605.21' 'sp605.22' 'sp605.23' 'sp605.24' 'sp605.25' 'sp605.26' 'sp605.27' 'sp605.28' 'sp605.29' 'sp605.3' 'sp605.30' 'sp605.31' 'sp605.32' 'sp605.33' 'sp605.34' 'sp605.35' 'sp605.4' 'sp605.5' 'sp605.6' 'sp605.7' 'sp605.8' 'sp605.9'
          Reading navigator.ini for getting root block name
          navigator.ini cannot be opened
          The following schematics found in C:\Users\Jorge\Desktop\rdf0038\:
          '6slx45tfg484_0.1' '6slx45tfg484_1.1' '6slx45tfg484_101.1' '6slx45tfg484_123.1' '6slx45tfg484_2.1' '6slx45tfg484_3.1' '6slx45tfg484_DED.1' '6slx45tfg484_GND.1' '6slx45tfg484_VCCAUX.1' '6slx45tfg484_VCCINT.1' 'ASP_134603_01_C.1' 'ASP_134603_01_D.1' 'ASP_134603_01_G.1' 'ASP_134603_01_GND.1' 'ASP_134603_01_H.1' 'SN74LVC2G08DCU_0.1' 'SN74LVC2G08DCU_1.1' 'TPS51200.1' 'TPS51200_1.1'
          Checking wir files...
          00:00:00 The following schematics found in C:\Users\Jorge\Desktop\rdf0038\:
          00:00:00 'sp605.1' 'sp605.10' 'sp605.11' 'sp605.12' 'sp605.13' 'sp605.14' 'sp605.15' 'sp605.16' 'sp605.17' 'sp605.18' 'sp605.19' 'sp605.2' 'sp605.20' 'sp605.21' 'sp605.22' 'sp605.23' 'sp605.24' 'sp605.25' 'sp605.26' 'sp605.27' 'sp605.28' 'sp605.29' 'sp605.3' 'sp605.30' 'sp605.31' 'sp605.32' 'sp605.33' 'sp605.34' 'sp605.35' 'sp605.4' 'sp605.5' 'sp605.6' 'sp605.7' 'sp605.8' 'sp605.9'
          sp605.1
          sp605.10
          sp605.11
          sp605.12
          sp605.13
          sp605.14
          sp605.15
          sp605.16
          sp605.17
          sp605.18
          sp605.19
          sp605.2
          sp605.20
          sp605.21
          sp605.22
          sp605.23
          sp605.24
          sp605.25
          sp605.26
          sp605.27
          sp605.28
          sp605.29
          sp605.3
          sp605.30
          sp605.31
          sp605.32
          sp605.33
          sp605.34
          sp605.35
          sp605.4
          sp605.5
          sp605.6
          sp605.7
          sp605.8
          sp605.9
          00:00:00 Parse Viewdraw.ini file
          The following user-specific settings are defined in the project:
          GRID: 10
          DETAIL: 1
          BORDERON: 1
          GRIDON: 1
          SDISTANCE: 10
          AUTOLOG: 10
          VALUESON: 1
          SORTON: 1
          XTRAERRS: 1
          DB_ERR_VERBOSE: 1
          COMPONENT_TOOLTIPS: 1
          SHEETSIZE: 1
          DEFSHEET: 1
          DEF_USESHEET1: 0
          DEFMETHOD: 0
          COMPTEXTON: 1
          PNUMSON: 1
          RNUMSON: 1
          BUBBLESIZE: 5
          DOTSIZE: 3
          BOXSIZE: 3
          BUSWIDTH: 2
          BUS_DOTSIZE: 5
          ROUTE: 2
          ADISTANCE: 10
          SNAPTOPIN: 1
          BEGIN_NETS_IN_SPACE: 0
          LABELON: 1
          UNIQUE_LABEL: 0
          TEXTON: 1
          TEXTORIGIN: 3
          WINDOW_BACKGROUND: 0 0 0
          SELECTION_LAYER: 15 0 0
          BORDER_LAYER: 15 0 0
          VALUE_LAYER: 7 0 0
          ANNO_LAYER: 7 0 0
          NET: 12 1 0
          COMPONENT: 15 0 0
          ATTRIBUTE: 14 0 0
          LABEL: 15 0 0
          PIN: 3 0 0
          BOX: 2 0 0
          LINE: 2 0 0
          CIRCLE: 2 0 0
          ARC: 2 0 0
          TEXT: 10 0 0
          The settings above have not been maintained during migration and it should be reset once the project has been opened. Note changing these settings will affect all projects that you open but do not affect the data in the project.
          00:00:01 Generating WIR files...
          00:00:01 The following schematics found in C:\Users\Jorge\Desktop\rdf0038\:
          00:00:01 'sp605.1' 'sp605.10' 'sp605.11' 'sp605.12' 'sp605.13' 'sp605.14' 'sp605.15' 'sp605.16' 'sp605.17' 'sp605.18' 'sp605.19' 'sp605.2' 'sp605.20' 'sp605.21' 'sp605.22' 'sp605.23' 'sp605.24' 'sp605.25' 'sp605.26' 'sp605.27' 'sp605.28' 'sp605.29' 'sp605.3' 'sp605.30' 'sp605.31' 'sp605.32' 'sp605.33' 'sp605.34' 'sp605.35' 'sp605.4' 'sp605.5' 'sp605.6' 'sp605.7' 'sp605.8' 'sp605.9'
          00:00:07 Generating WIR files: done
          00:00:07 CProjectMigration::OpenICDB()
          00:00:07 iCDB opened successfully
          00:00:07 AddSnapshot successful
          00:00:07 Design blocks conversion
          00:00:07 The following schematics found in C:\Users\Jorge\Desktop\rdf0038\:
          00:00:07 'sp605.1' 'sp605.10' 'sp605.11' 'sp605.12' 'sp605.13' 'sp605.14' 'sp605.15' 'sp605.16' 'sp605.17' 'sp605.18' 'sp605.19' 'sp605.2' 'sp605.20' 'sp605.21' 'sp605.22' 'sp605.23' 'sp605.24' 'sp605.25' 'sp605.26' 'sp605.27' 'sp605.28' 'sp605.29' 'sp605.3' 'sp605.30' 'sp605.31' 'sp605.32' 'sp605.33' 'sp605.34' 'sp605.35' 'sp605.4' 'sp605.5' 'sp605.6' 'sp605.7' 'sp605.8' 'sp605.9'
          00:00:07 Adding block sp605.1
          00:00:07 Adding block sp605.2
          00:00:07 Adding block sp605.3
          00:00:07 Adding block sp605.4
          00:00:07 Adding block sp605.5
          00:00:07 Adding block sp605.6
          00:00:07 Adding block sp605.7
          00:00:07 Adding block sp605.8
          00:00:07 Adding block sp605.9
          00:00:07 Adding block sp605.10
          00:00:07 Adding block sp605.11
          00:00:07 Adding block sp605.12
          00:00:07 Adding block sp605.13
          00:00:07 Adding block sp605.14
          00:00:07 Adding block sp605.15
          00:00:07 Adding block sp605.16
          00:00:07 Adding block sp605.17
          00:00:07 Adding block sp605.18
          00:00:07 Adding block sp605.19
          00:00:07 Adding block sp605.20
          00:00:07 Adding block sp605.21
          00:00:07 Adding block sp605.22
          00:00:07 Adding block sp605.23
          00:00:07 Adding block sp605.24
          00:00:07 Adding block sp605.25
          00:00:07 Adding block sp605.26
          00:00:07 Adding block sp605.27
          00:00:07 Adding block sp605.28
          00:00:07 Adding block sp605.29
          00:00:07 Adding block sp605.30
          00:00:07 Adding block sp605.31
          00:00:07 Adding block sp605.32
          00:00:07 Adding block sp605.33
          00:00:07 Adding block sp605.34
          00:00:07 Adding block sp605.35
          00:00:09 Error: Default configuration for sp605.1 cannot be created:
          viewbase: Error 222: Error - Could not find WIR file SFP_FLOW.1.
          00:00:10 Migration stopped because schematics cannot be migrated to iCDB

          • 2. Re: Project Migration from 2007 DxD to 2010 DxD
            robert_davies

            In some cases the older versions of DxDesigner leave behind schematics that aren't used by the design but the migration cannot determine this, it works on one WIR file for each schematic file. You could try moving the offending file out of the sch folder and try re-running the migration. If the schematic isn't used then the migration will complete, if not you'll have to run check.exe on the files to generate the WIR files, or go back to 2007 and run a save and check.