VeSys doesn't support automatic zone naming in the schematic, you could manually add the zone name as a custom property if required. Generally schematic drawings are quite small and so support for zoning wasn't seen as a high priority feature (the oposite is true for a harness hence the inclusion of zone referencing). Our drawing standard shows the power on the left and grounds on the right, as a result our Wire/Page Breaks are typically shown on either the left or right sides of the schematic. This makes it easy to locate the Wire/Page Breaks because you only need to look down 1 side of the drawing, we also change the arrow direction to indicate current flow.
Of course VeSys 2.0 does do this, it is one of the many advantages of VeSys 2.0 over Classic.
Yes, I see, thanks a lot.