• Dynamic Performance and Behavior Analysis using Sourcery Analyzer and LTTng Data

    This whitepaper briefly describes the 'tracing' tool/techniques that help address the debugging and performance optimization challenges that are becoiming common in today's increasingly complex embedded systems.
    Anil
    last modified by Anil
  • How to build and debug a static library

    This video demonstrates how to build and debug a static library using CodeBench ARM EABI.  
    james_patterson
    last modified by Anil
  • How to update firmware in a Sourcery Probe

    This video demonstrates how to update the firmware in a Sourcery Probe using the Settings And Firmware Update tool from within CodeBench.    
    james_patterson
    last modified by Anil
  • STLink not working with Sourcery CodeBench IDE Version: 2013.05-53

    I unable to debug a STM32 L1 Discovery Board using a Stlink debugger with Sourcery Code Bench.  Any information would be appreciated.    Information   Windows 7 64bit. Code bench Version: 2013...
    rfritch
    last modified by rfritch
  • How is uint64_t handled?

    I'm using the free Sourcery CodeBench to compile for ARM Cortex-A9 (specifically, the Xilinx Zynq processor) and my application uses variables declared as uint64_t.  My application works on a regular linux box, b...
    jschell
    last modified by jschell
  • C & C++ Development for Custom Instruction Set Architectures with GNU or LLVM Toolchains

    Don't miss this webinar on using open source technology (GNU or LLVM) to develop compilers for custom instruction set architectures.   If you have any questions, please post them to this discussion thread.  
    Anil
    created by Anil
  • Using Sourcery Analyzer

    Hi,   How to use Mentor Embedded Sourcery Analyzer tool? I wanted it to analyse CPU usage and for Performance analysis.   Could anyone help me out with this?   I am using Nucleus ReadyStart(Nucleus R...
    anand-k
    last modified by anand-k
  • Feature questions

    Hello  Everyone I could not find informations in the documentation about the following topics. I would appreciate is someone can point me to the appropriate document or provide me with indication on how to do. ...
    g.yvraut
    last modified by g.yvraut
  • gcov support in Sourcery Codebench IDE/code coverage analysis

    I want to do code coverage analysis of my application in Sourcery Codebench IDE.  I tried gcov, but couldnt do any trace. Is there a better way to do code coverage check? I am using Nuclues Readystart Sourcery C...
    anand-k
    last modified by anand-k
  • Connection problem with STM32F4Discovery

    Hello,   When trying to connect to the STM32F4Discovery board with Sourcery CodeBench IDE Version: 2013.05-26 and  debugger interface declared as "ST-LINK", I am getting the following message: "No devices f...
    g.yvraut
    last modified by g.yvraut
  • c++config.h missing

    The 16 May 2013 professional Code Sourcery IA32 GNU/Linux compiler for arm-none-eabi is missing the file include/c++/4.7.3/bits/c++config.h   This file is included from include/c++/4.7.3/utility   Also mis...
    mike18
    last modified by mike18
  • New to Sourcery Code Bench problems with stmf4 discovery board

    I'm probably doing something very silly but I'm having problems trying to connect to an stm32f4 discovery board with it's inbuilt ST/LINK V2 interface. However when I try to set the board as a target in Code ...
    mentor3
    last modified by mentor3
  • Support for Freescale new i.MX 6 series processors?

    Hi,   Browsing the Supported processors table (http://www.mentor.com/embedded-software/supported-processors) I find some iMX 5 series processors from Freescale. Freescale, however, recommend the new generation i...
  • CodeBench Lite - ARM compilerproduce different object file for the same source file !!

    Using the GCC compiler for ARM (windows) : arm-none-eabi-gcc.exe (Sourcery CodeBench Lite 2012.09-63) 4.7.2 version I have got different object file produced every ~5 times i compiled the same source file. The opti...
    abdurahman.alfeky
    last modified by abdurahman.alfeky
  • LTTng Userspace Tracing With Sourcery CodeBench

    Ever had a bug in userspace code that you couldn't nail down with gdb? You probably turned to printf, right?   Tracing is a better way, and this tutorial explains how to add LTTng tracepoints to an application a...
    Hollis_Blanchard
    last modified by Hollis_Blanchard
  • Are you using the new Compile Cache feature in Sourcery CodeBench? Tell us about your experience.

    This feature is available on Linux hosts only. You can enable the compile cache feature within Sourcery CodeBench from the Window > Preferences > Sourcery CodeBench settings.
    Anil
    created by Anil
  • What's New in the 2013.05 Release of Sourcery CodeBench & Sourcery Analyzer

    An overview of what is new in the 2013.05 releases of Sourcery CodeBench and Sourcery Analyzer.   For more details, please also visit: http://www.mentor.com/embedded-software/sourcery-tools/sourcery-codebench/new
    Anil
    last modified by Anil
  • The Advantages of Real-time Trace Debug in Complex Embedded Systems

    Working in embedded system design today, product development windows are becoming shorter and shorter as engineering teams are under more pressure to deliver a product with even greater complexity. Products in the emb...
    kamrans
    last modified by kamrans
  • Should I use Sourcery CodeBench for Stellaris or Sourcery CodeBench for ARM EABI?

    Question   I'm planning on evaluating and purchasing Sourcery CodeBench for our project. Should I evaluate/buy Sourcery CodeBench for ARM EABI or Sourcery CodeBench for Stellaris EABI? Does Sourcery CodeBench...
    james_patterson
    last modified by kathleen_oliver
  • codebench lite build error

    Hi,   while build project,I met an eror:     /bin/sh: -c: line 0: syntax error near unexpected token `(' /bin/sh: -c: line 0: `C:\Program Files (x86)\CodeSourcery\Sourcery_CodeBench_Lit e_for_ARM_EABI...
    aihua.zhang
    last modified by aihua.zhang