i am learning dxdesigner 2007.i could not get local libary in my design (for exampl resistor ,capacitor, opamp i could not find ) how to find my local library locatiion.please help any one .... for this post
Local libraries refer to symbols created within the design database, for example hierarchical block symbols or symbols created during translation from other third party schematics. To attach other libraries to a project go to setup -Settings- Symbol Libraries and then use the Add button to add libraries to the project. There are a number of libraries delivered with the installation if you chose to load them. You will find them in the SD_HOME\libraries folder. There is also an evaluation guide delivered with the product, it would be a good place to start.
SupportNet also provides many useful resources when evaluatiing or learning our products http://supportnet.mentor.com/
Thanks for your reply i added location of library but i could not find any thing. i don't know how to access supportnet also please reply for this queries
You need to select the individual library folder so select SDD_HOME\Libraries\commmon for example. Also do the evaluation and look at how that project is set up. Failing that look at getting some Mentor training.
Thanks for your reply. now i can add passive components and more library .how can i create library which should be consist more symbol.
and one more doubt is
PADS dxdesigner and Expedition dxdesigner both same or different ??
Retrieving data ...