Can you provide some additional information? What is your regional setting for the decimal delimiter is it comma or point or some other setting. What are the properties attached to (Value=C1 etc) and what are their purpose?
From the default partlister setting, I only change the Ref Designator Setting
I only change the Mode to Total and it will show that error.
Other Mode like compress,slots , unique and full are okay.
The purpose I want do this is to show each individual components Reference designator.Previously in Xpedition 7.9.5 I did not experience such a problem.
Ref Designator can't be made a total. If you want each component's Reference Designator use one of the built in queries - SinglrLinePerRefDes to get a report as Ref Designator per line or change the setting in your query from Ref Designator Mode=Compress to Mode=Full.
I am getting this also in xDX Designer, first time using Partlister after upgrade to PADS VX.1.1.
Mine is happening with the DEVICE property:
Error: Value = MMBTA06 can't be converted to a fixed type (check locale decimal settings)!
We use the DEVICE property to gather same parts to one row and sum the quantity.
I still get the parts list and it looks correct so far, but every part has this error (one error per BOM row).
I will post if I figure anything out.
In the PartsLister configuration Dialog Select Columns in the left pane, Select Device, I had checked "Sum row values" at some point. This was a change to my previous configuration. I unchecked it and all seems good at this time.