0 Replies Latest reply on Aug 29, 2016 7:39 AM by bollenberg

    definition of resitor-arrays

    bollenberg

      Is there anything special to regard, if I want to define a resistor-array in the library concerning correct electrical net generation?

      Currently, I have the problem, that electrical nets ends at the resistor array. For example, CES generates separate electrical nets from the uC to the resistor array and from the resistor array to the connector. If I use a singe resistor, there is one elektrical net from the uC to the connector. All series components are recognized correct from the system.

      Both symbols (single resistor and resitor array) are designated with the reference designator "R". There is only the difference, that the single resistor is a 2pin-symbol while the resistor array is a 8pin-symbol.

       

      Many thanks for your help.