in 2005.3 it was possible to start a net line when you right clicked a symbol pin and started drawing. In 7.9.2 you have to double right click to start a net line. Is there a way to change this behaviour?
Check your settings under Setup -Settings - Schematic Editor - Strokes, Pan and Zoom. If strokes are set to Right Button then you will (possibly) see a red leader line for the stroke rather than a net line starting. Turnings strokes off should provide the same functionality as 2005.
Hi, any idea how to enable this feature back in VX.2.1 ?
Disabling strokes does not do the trick this time.
This appears to be a bug in 2.1, it is working as previously in 2.2.
Thanks for the prompt response!
Now I'll just need to convince the company to use the new version
Just re-visited this after Shannon's posting below and it seems she is correct, in my case pins were not selectable in the design. having switched them back on it is working as previously.
Make sure Pins are selected in the Selection filter...
Retrieving data ...